Table of Contents
Advertisement
dhcpclient(1M)
-s
server_ipaddress
This option is used to specify the ip address of the
be sent. server_ipaddress should be specified in dotted decimal form.
log_type If the log_type is a non zero value and if the debug_level is low enough for the process to
-t
detach from the tty (see syslog(3C)), then, the logging goes to
STDERR
-v
This option prints the various version strings of the
-x
send_attempts
This option is used to specify the number of attempts the packet should be sent before obtain-
ing a reply. send_attempts must be specified as an unsigned number.
time_to_wait
-z
This option is used to specify the time interval between successive packet retransmission.
time_to_wait will be in seconds.
EXAMPLES
To
the lease for the interface lan0 and invoke logging in
maintain
mands is invoked at the command prompt:
dhcpclient -b lan0 -N "dhcp1"
dhcpclient -m lan0 -N "dhcp1" -l 3 -t 1
To trace the packet and get the debugging messages, use:
dhcpclient -b lan0 -N "dhcp1" -p -l 8
This is an example of a
00 4 lan0
01 5 dhcph
02 0
03 0
04 0
05 0
06 4 4294967295
07 4 4294967295
08 4 0
09 4 0
10 4 1
11 6 8 0 9 25 a5 b1
12 4 192.11.22.107
13 4 255.255.255.0
14 4 0.0.0.0
15 0
16 4 192.11.22.3
17 4 192.11.22.3
18 0
19 0
20 0
21 4 0.0.0.0
22 0
23 0
24 39 63 82 53 63 35 1 5 33 4 ff ff ff ff 36 4 c0 b8
16 3 1 4 ff ff ff 0 c 5 64 68 63 70 68 2 4 ff ff b2 a8 ff
AUTHOR
was developed by HP.
dhcpclient
FILES
/etc/dhcpclient.data
HP-UX 11i Version 2: December 2007 Update
. This option is used when the
/etc/dhcpclient.data
configuration file.
− 3 −
server to which the request should
DHCP
is running as a daemon.
dhcpclient
dhcpclient
to stdout.
, the following set of com-
syslog
file.
Hewlett-Packard Company
dhcpclient(1M)
syslog
, else it goes to
165
d
Advertisement
Table of Contents
