HP B2355-92068 Administration Manual page 195

drd(1M)
major_mode . extended_option
# comment
RETURN VALUE
The command modes return one of the following values:
drd
0 Success.
Error.
1
Warning.
2
EXAMPLES
To display drd usage information:
drd -?
To display extended option usage:
drd
drd -x -?
To display usage for the
drd clone -?
To clone the root LVM volume group or VxVM disk group to a physical device:
For 11i v2:
drd clone -t /dev/dsk/c1t1d0
For 11i v3:
drd clone -t /dev/disk/disk1
To preview the clone of the root LVM volume group or VxVM disk group to a physical device:
For 11i v2:
drd clone -p -t /dev/dsk/c1t15d0
For 11i v3:
drd clone -p -t /dev/disk/disk7
To display all
drd clone
drd clone -x -?
To mount the inactive system image:
drd mount
If the system image mounted was created by the most recent
will be mounted at /var/opt/drd/mnts/sysimage_001
If the system image was booted when the most recent
will be mounted at
/var/opt/drd/mnts/sysimage_000
To display all drd mount
drd mount -x -?
To unmount the inactive system image:
drd umount
To display all drd umount
drd umount -x -?
To see the software that is installed on the inactive system image (without any need to mount the image
first):
HP-UX 11i Version 2: December 2007 Update
= value For example:
Refer to the DESCRIPTION section for an explanation of
major modes.
Comment lines begin with
command:
drd clone
extended options:
extended options:
extended options:
− 2 −
clone.verbosity=5
# and are ignored.
command, the root file system
drd clone
.
drd clone command was run, the root file system
.
Hewlett-Packard Company
drd(1M)
d
195