Table of Contents
Advertisement
map-mbone(1M)
NAME
map-mbone - Multicast Router Connection Mapper
SYNOPSIS
/usr/sbin/map-mbone
[multicast-router]
DESCRIPTION
map-mbone
the information to the standard out.
multicast-router. When the multicast-router receives the request, it sends back its configuration informa-
tion. multicast-router can be either an ip address or a system name.
If the multicast-router is not specified, flood mode is on by default and the igmp request message is sent to
all the multicast router on the local network. With flood mode on, when
routers from the replies, it will send the same igmp request to the new neighbor routers. This activity con-
tinues until no new neighbor routers are reported in the replies.
The command line options are:
debuglevel Sets the level for printing out the debug message. The default is 0, which prints only
-d
retries
-r
timeout
-t
-f
-g
-n
m
The output contains the interface configuration information of the requested router(s). The format for
each interface output is:
interface_addr -> neighbor_addr (neighbor_name) [metrics/thresh/flags]
If there are multiple neighbor routers on one interface, they will all be reported. The neighbor_name will
not be printed if the
The possible values for
tunnel
srcrt
down
disabled
querier
The format of the GRaphEd output is:
interface_addr_in_integer {$ NP low_byte_addr high_byte_addr} node_name
[ neighbor_addr_in_integer metrics/threshold/flags ]
If there is no neighbor router on an interface, then a
tiple neighbor routers on one interface, all of them will be reported. The possible values for
E
P
D
Please see mrouted(1M) for
EXAMPLES
Querying
554
Hewlett-Packard Company
[
-d
debuglevel] [
requests the multicast router connection information from the multicast-router, and prints
error and warning messages. Debug level three prints most the messages.
Sets the retry times to poll the routing daemon for information. The default is 1.
It specifies the timeout value in seconds for waiting the reply. The default value is 2
seconds.
Sets the flood mode on. It is the default value when no multicast-router is given on the
command line input.
Generates output in GRaphEd format.
Disable DNS lookup for the multicast router names.
option is specified on the command line.
-n
are:
flags
Neighbors are reached via tunnel.
The tunnel uses IP source routing.
The interface is down.
The interface is administratively disabled for multicast routing.
The local router is the querier of the subnet.
The neighbor is reached via tunnel.
The neighbor is on the same network/subnet.
The interface is down.
metrics
camden.cup.hp.com
for the multicast router connection information.
-f
] [
-g
] [
-n
] [
-r
sends out the ASK_NEIGHBORS igmp message to the
map-mbone
*
will be put next to the node_name. If there are mul-
and
.
thresh
− 1 −
HP-UX 11i Version 2: December 2007 Update
map-mbone(1M)
retries] [
-t
timeout]
map-mbone
finds new neighbor
flags
are:
Advertisement
Table of Contents
