HP B2355-92068 Administration Manual page 173

dhcpv6clientd(1M)
15 <length> SLP DA address and its scope
16 <length> SLP Service Scope
17 <length> Time Zone
18 <length> Retransmission Variables
The <length> field denotes the length of the data field following it.
All these lines collectively indicate one record. The configuration file will have a series of record. See the
EXAMPLE section below for a sample configuration file.
Since this file contains all the configuration information, it can be used to identify the server from which
the configuration parameters were obtained.
When dhcpv6clientd
/etc/dhcpv6client.data
1. may have been deleted or is not available for reading;
2. may be corrupted or contain irrelevant data for a particular interface;
3. may not contain the configuration information for a particular interface.
In those cases,
dhcpv6clientd
will form a SOLICIT message and send it to the pre-determined ALL DHCP Agents address. In response to
this, the client will receive the ADVERTISE message from DHCP servers. The client will select a DHCP
server based on the DHCP server preference value.
EXAMPLES
dhcpv6clientd treats the NIS server and DNS server addresses as default configuration parameters.
dhcpv6clientd -d nis_sa dns_sa
The following is an example of a
01 4 lan4
02 16 3ffe::1234
03 8 22:c2:00:10:83:b9:53:3c
04 29 4 3ffe::428d 64 1005134643 1005134663
05 4 1005134548
06 4 1005134551
07 0
08 32 3ffe::12 3ffe::19
09 6 hp.com
10 16 3ffe::19
11 12 india.hp.com
12 32 3ffe::13 3ffe::19
13 12 india.hp.com
14 32 3ffe::15 3ffe::19
15 22 16 3ffe::15 (proxy=rio) 0
15 0
16 0
17 0
18 0
00 0
AUTHOR
was developed by Hewlett-Packard.
dhcpv6clientd
FILES
/etc/dhcpv6tab
/etc/rc.config.d/netconf-ipv6
/etc/dhcpv6client.data
SEE ALSO
dhcpv6d(1M), syslog(3C).
HP-UX 11i Version 2: December 2007 Update
is invoked, it will first
. However, the configuration file
needs to obtain a new set of addresses from the server. Thus the client
/etc/dhcpv6client.data
Client configuration database file.
− 2 −
dhcpv6clientd(1M)
try to read the configuration
file:
Hewlett-Packard Company
d
file,
173