Table of Contents
Advertisement
drd_register_mirror(1M)
NAME
drd_register_mirror - notify DRD that a system image has been manually mirrored using LVM or VxVM
commands
SYNOPSIS
drd_register_mirror
DESCRIPTION
The
drd_register_mirror
system image has been mirrored to the mirror_block_device_file specified.
The
drd_register_mirror
Options
drd_register_mirror
Displays the usage message.
-?
Operands
drd_register_mirror
mirror_block_device_file
The block device special file of the mirror disk. The file should refer to the entire disk, not
to a partition.
RETURN VALUE
drd_register_mirror
Success.
0
Error.
1
Warning.
2
EXAMPLES
To display
drd_register_mirror
drd_register_mirror -?
To notify DRD that all logical volumes in the root group have been mirrored to disk
drd_register_mirror /dev/dsk/c1t2d0
To notify DRD that all logical volumes in the inactive system image have been mirrored to disk
/dev/dsk/c2t3d0
drd_register_mirror /dev/dsk/c2t3d0
AUTHOR
drd_register_mirror
SEE ALSO
drd-activate(1M), drd-clone(1M), drd-deactivate(1M), drd-mount(1M), drd-runcmd(1M), drd-umount(1M)
Dynamic Root Disk Administrator's Guide, available on the HP Technical Documentation web site at
http://docs/hp.com/en/DRD
HP-UX 11i Version 2: December 2007 Update
[
] mirror_block_device_file
-?
command notifies DRD that either the active system image or the inactive
command must be run after the mirror has been created.
recognizes the following option:
recognizes the following operand:
returns one of the following values:
usage information:
.
was developed by HP.
.
− 1 −
drd_register_mirror(1M)
/dev/dsk/c1t2d0
Hewlett-Packard Company
d
:
217
Advertisement
Table of Contents
