Table of Contents
Advertisement
drd-clone(1M)
NAME
drd-clone: drd - clone mode clones the root volume group
SYNOPSIS
drd clone
[
-?
] [
-p
target_device_file [
-t
DESCRIPTION
The
drd clone
command creates a copy of the LVM volume group or VxVM disk group containing the
root file system (
). In particular, it creates a new group, creates a volume in the new group for each
/
volume in the root group, configures swap and dump volumes, and copies the contents of each file system in
the root group to the corresponding file system in the new group.
Options
recognizes the following options:
drd clone
Displays the usage message.
-?
-p
Sets preview mode. See also
-q
Decreases the verbosity level by one each time it is specified. For the interaction with
verbosity
-t
device_special_file
Specifies the block device special file of a single physical disk on which the cloned system
image is to be written. The block device special file must exist on the system and be write-
able. All data previously on the disk will be unavailable after a clone operation. See also
-x overwrite
Increases the verbosity level by one each time it is specified. For the interaction with
-v
verbosity
Displays the list of possible
-x -?
option
value
-x
=
Sets the extended option to a value. See the Extended -x Options section below.
option_file
-X
Gets the extended options from a file. See drd(1M) for an explanation of the format and an
example of an option file.
Extended -x Options
recognizes the following
drd clone
-x ignore_unmounted_fs=false
Usage: Basic
Controls whether a clone fails when an unmounted file system in the root volume group is
detected.
-x logfile=/var/opt/drd/drd.log
Usage: Basic
This is the path to the log file for this command. Each time DRD is run, this file will grow
larger. This can be changed, for example, to a month-specific location for easier archiving,
off-host backup, and rotation.
-x log_verbosity=4
Usage: Basic
Specifies the level of message verbosity in the log file. (See also
values are:
Saves only ERROR messages and the starting/ending BANNER messages.
0
Adds WARNING messages.
1
Adds NOTE messages.
2
3
Adds INFO messages (informational messages preceded by the
HP-UX 11i Version 2: December 2007 Update
] [
-q
]... [
-v
]...
option
value] [
-x
=
-x -?
-x preview
, see the Extended -x Options section below.
, in the Extended -x Options section below.
, see the Extended -x Options section below.
(extended) options.
-x
(extended) options. If a default value exists, it is shown in
-x
− 1 −
] [
option_file]
-X
, in the Extended -x Options section below.
-x verbosity
Hewlett-Packard Company
drd-clone(1M)
-x
-x
.
bold
.) Legal
*
character).
201
d
Advertisement
Table of Contents
