HP B2355-92068 Administration Manual page 199

System administration commands
Table of Contents

Advertisement

drd-activate(1M)
2
Adds NOTE messages.
Adds INFO messages (informational messages preceded by the
3
Adds verbose INFO messages.
4
Adds very-verbose INFO messages.
5
-x preview=false
Usage: Basic
If
true
exit; do not commit changes to disk). Setting this option to
specifying
-x reboot=false
Usage: Basic
If
true
tion.
-x verbosity=3
Usage: Basic
Specifies the level of standard error verboseness. Legal values are:
0
Displays only ERROR messages and the starting/ending BANNER messages.
Adds WARNING messages.
1
Adds NOTE messages.
2
Adds INFO messages (informational messages preceded by the
3
4
Adds verbose INFO messages.
5
Adds very-verbose INFO messages.
See also the
verbosity by 1 (for example, from 3 to 4) and the
The
-v
For example, if both
the effective verbosity is 2. The minimum combined verbosity level is 0.
For example, if both
effective verbosity is 3. The maximum combined verbosity level is 5.
RETURN VALUE
returns one of the following values:
drd activate
0
Success.
1
Error.
Warning.
2
EXAMPLES
To set the inactive system image as the primary boot disk:
drd activate
To set the inactive system image as the primary boot disk and a different disk as the alternate boot disk:
For 11i v2:
drd activate -x alternate_bootdisk=/dev/dsk/c1t1d0
For 11i v3:
drd activate -x alternate_bootdisk=/dev/disk/disk1
To boot to the inactive system image immediately:
drd activate -x reboot=true
HP-UX 11i Version 2: December 2007 Update
, run this command in preview mode only (that is, complete the analysis phase and
-p
on the command line.
, the system is rebooted at the successful completion of a
and
options in the Options section above. The
-v
-q
and
options can be given more than once. Multiples can be merged, as in
-q
-x verbosity=5
-x verbosity=1
− 2 −
drd-activate(1M)
*
has the same effect as
true
drd activate
*
-v
-q
option decreases the verbosity by 1.
and
are included on the command line,
-qqq
and
are included on the command line, the
-vv
Hewlett-Packard Company
character).
opera-
character).
option increases the
.
-qq
199
d

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hp-ux 11i

Table of Contents