Disksecn(1M): Disksecn - HP B2355-92068 Administration Manual

disksecn(1M)
This adjustment also takes place when the disk name is known and an assumed sector size (block size) is
passed in as the argument of the
size) used to create the
RETURN VALUE
disksecn
0 Successful completion.
Usage error.
1
2 User did not input parameters for an unknown disk.
Disk too small or an invalid block size.
3
d
disksecn
•
disksecn
• Requested both
• Illegal block size requested.
• Unknown disk name was specified and user did not supply disk information.
• Disk's maximum storage space is less than approximately 44 MB.
WARNINGS
Alternate names are not included in the output when the
Blanks are required in the command line between each of the switches when invoking
A blank is required between the
disksecn -p -b 1024 -n hp9712
disksecn
system assumes that the block size used was DEV_BSIZE when it reads the information stored in the
/etc/disktab
AUTHOR
disksecn
FILES
/etc/disktab
SEE ALSO
disktab(4).
188 Hewlett-Packard Company
switch which is not DEV_BSIZE bytes, the assumed sector size (block
-b
/etc/disktab
returns the following values:
aborts and prints an error message under the following conditions:
was invoked without specifying a disk name.
-p and -d switch.
switch and the disk name argument to that switch. For example:
-n
does not save the block size used to generate the
file.
was developed by the University of California, Berkeley.
Servers Only
file.
-d switch is used.
/etc/disktab
− 2 −
HP-UX 11i Version 2: December 2007 Update
disksecn(1M)
.
disksecn
disk description file. The