Polycom SIP 3.0.2 Administrator's Manual page 278

Administrator's Guide Addendum for the SoundStation IP 7000
Attribute
call.cellPhoneAutoBridging
Bitmaps <bitmap/>
Feature <feature/>
Multiple Key Combinations and Default Key Layout
1 - 12
Permitted
Values Default
Disabled, Disabled
Enabled
The IP_7000 parameters affect the SoundStation IP 7000 conference phone.
Indicators <ind/>
The IP_7000 parameters affect the SoundStation IP 7000 conference phone.
Animations <anim/>
The IP_7000 parameters affect the SoundStation IP 7000 conference phone.
Graphic Icons <gi/>
The IP_7000 parameters affect the SoundStation IP 7000 conference phone.
The "call list" feature cannot be disabled on the SoundStation IP 7000 phone.
The manage conference feature is always enabled on the SoundStation IP 7000
phone.
The multiple key combinations on the SoundStation IP 7000 conference phone
are as follows:
• Rebooting the Phone—Press and hold *, #, Volume-, and Volume+
simultaneously until a confirmation tone is heard or for about three
seconds.
Interpretation
If set to Enabled, the cell phone audio is
automatically bridged to active SIP call
(conference call). If one SIP call is put on hold
and another SIP call is activated the cell phone
audio is automatically bridged to the newly active
SIP call.
If set to Disabled, the cell phone audio is
available only if there is no active SIP calls. If all
SIP calls are placed on hold, then the cell phone
audio is available.