Polycom SIP 3.0.2 Administrator's Manual page 226

Administrator's Guide SoundPoint IP / SoundStation IP
Name
device.auth.regUserx
device.auth.regPasswordx
device.sec.configEncryptio
n.key
device.syslog.serverName
device.syslog.transport
device.syslog.facility
device.syslog.renderLevel
device.syslog.prependMac
device.em.power
device.net.etherVlanFilter
device.net.etherStormFilter
device.sec.SSL.certList
device.sec.SSL.customCert
A - 108
Possible Values
any string
any string
any string
dotted-decimal IP address
OR
domain name string
None=0,
UDP=1,
TCP=2,
TLS=3
0 to 23
0 to 6
Enabled, Disabled
Enabled, Disabled, Null
Enabled, Disabled
Enabled, Disabled
all, custom, default
X.509 certificate
Description
The SIP registration user name for registration x
where x = 1 to 12.
The SIP registration password for registration x
where x = 1 to 12.
Configuration encryption key that is used for
encryption of configuration files.
The syslog server IP address or host name.
The default value is NULL.
The protocol that the phone will use to write to the
syslog server.
If set to "None", transmission is turned off, but the
server address is preserved.
A description of what generated the log message.
For more information, refer to section 4.1.1 of RFC
3165.
The default value is 16, which maps to "local 0".
Specifies the lowest class of event that will be
rendered to syslog. It is based on
log.render.level and can be a lower value.
Refer to Basic Logging <level/><change/> and
<render/> on page A-77.
If enabled, the phone's MAC address is prepended
to the log message sent to the syslog server.
Refer to the EM Power parameter in
page 3-6.
Refer to the VLAN Filtering parameter in
Menu on page 3-11.
Refer to the Storm Filtering parameter in
Menu on page 3-11.
The type of certificate list.
The certificate value.
Main Menu on
Ethernet
Ethernet