Polycom SIP 3.0.2 Administrator's Manual page 167

Attribute
voice.qualityMonitoring.collector.alert.dela
y.threshold.warning
voice.qualityMonitoring.collector.alert.dela
y.threshold.critical
Attribute
voice.qualityMonitoring.collector.server.x.a
ddress
voice.qualityMonitoring.collector.server.x.p
ort
Attribute
voice.qualityMonitoring.enable.rtcpxr
Permitted
Values
Null, 10 to
2000
Null, 10 to
2000
Server <server/>
This configuration attribute is defined as follows:
Permitted
Values
Dotted-decima
l IP address or
host name
0, Null, 1 to
65535
RTCP-XR <rtcpxr/>
This configuration attribute is defined as follows:
Permitted
Values
0, 1
Default Interpretation
Null Threshold value of one way delay
(in ms) that causes phone to send a
critical alert quality report. If set to
Null, warning alerts are not
generated due to one way delay.
One-way delay includes both
network delay and end system
delay.
Null Threshold value of one way delay
(in ms) that causes phone to send a
critical alert quality report. If set to
Null, critical alerts are not generated
due to one way delay. One-way
delay includes both network delay
and end system delay.
Default Interpretation
Null IP address or host name and port of
a SIP server (report collector) that
accepts voice quality reports
contained in SIP PUBLISH
messages. Set x to 1as only one
report collector is supported at this
time.
5060 If port is 0 or Null, port 5060 will be
used. Set x to 1as only one report
collector is supported at this time.
Default Interpretation
0 Enables generation of RTCP-XR
packets.
Configuration Files
A - 49