Postscript - Setting Up For Printing; Windows 95/98 - Accessing The Printer Properties - Lanier 5222 Operator's Manual

PostScript - Setting Up for Printing

Windows 95/98 - Accessing the Printer Properties

There are two methods you can use to open the Printer Properties.
Making Printer Default Settings
To make the printer default settings, first open the Printer Properties from the [Printers] window.
Making Printer Settings from an Application
To make the printer settings for a specific application, open the Printer Properties from that
application. The following example describes how to make settings for the WordPad application
that comes with Windows 95.
Setting Up Printer Driver
1
Click [Start] on the task bar, point to [Settings], and then click [Printers].
•
The [Printers] window appears.
2
Click the icon of the printer whose default settings you want to change.
3
On the [File] menu, click [Properties].
•
The Printer Properties appears.
4
Set desired settings and click [OK].
•
The actual procedures you should follow to open the Printer Properties may differ
depending on the application. For details, see the documentation that comes with the
application you are using.
•
When you use some applications, the driver's initial default settings of the applications
might be applied over the printer driver's setting.
•
Any settings you make in the following procedure are valid for the current application
only.
1
On the [File] menu, click [Print].
•
The [Print] dialog box appears.
2
From the [Name:] box, select the printer you want to use, and then click [Properties].
•
The Printer Properties appears.
3
Set desired settings and click [OK].
4
Click [OK] to start your printing.
PostScript - Setting Up for Printing
5 - 5