Advertisement
GETTiGSTARTED
FSO / F85 CONSOLES
Power the treadmill
on by plugging
it into an appropriate
wall outlet,
then turn on the power
switch
located
at the front of the treadmill
below
the motor
hood. Ensure that the Safety
Key is
installed, as the treadmill
will not power
on without
it (see assembly step 7 for reference).
When the power
is turned
on, a message
will scroll across the Message
Window
showing
the
current
software
version.
Then the Time and Distance
Windows
will display
Odometer
read-
ings for a short time, Time Window
will show how many hours the treadmill
has been in use
and the Distance
Window
will show how many miles (or Kilometers
if the treadmill
is set to
metric
readings)
the treadmill
has gone.The
treadmill
will then
enter idle mode, which
is the
starting
point
for operation.
QUICK-START
OPERATION
1.
Attach
the Safety
Key to wake display
up (if not already
on).
2.
Press the Start
key to begin
belt movement
then adjust
to the desired
speed using the
Speed
A/T
keys (console
or handgrip).
You may also use the Quick
speed keys 2, 3, 4, 5, 6,
9 or 12 to adjust
the speed.
3.
To slow tread-belt
press and hold the Slow key (console
or handgrip)
to the desired
speed.
You may also press the Quick
speed adjust keys, 2 through
12.
4.
To stop the tread-belt
press Stop
key or pull away Safety
Key.
FSO / FSS TREADMILL
14
Advertisement
