Advertisement
/
ASSEM LYINSTRUCTIONS
1.
Remove the treadmill
from the carton and position
it aside on a smooth, level
floor.The
rear should be at least 3'from any wall. Do not remove the Velcro
belt until you have removed the plastic wrap and Styrofoam
from beneath
the unit. Turning the unit on its side after removing
the belt may cause
the unit fold up and cause serious injury!
128
•
#128. M5 Speed Nut
Clip (6 pcs)
1.
Install the six Speed Nut Clips (128) on the Frame Base left and right side.
2.
Slide the lower handlebar
covers (65 & 67R) onto the console masts (notice
orientation).
3.
Slide the Frame Base Caps (161 [ & 162 R) over the Upright tubes (4 & 5).
Connect the Lower Computer
Cable (49) to the Middle Computer
Cable (50)
on the right side of the unit.
Before
attaching
the hardware
to Step 3, make
sure the cables you just connected
don't
get pinched
in between
the steel tubing.
If they
do, this may cause issues that prevent
the treadmill
from
operating
properly.
FSO / F85 TREADMILL
8
Advertisement
