Advertisement
1
•
i
#151. 5/16"x 3/4"
Button Head Socket
Bolts (4 pcs)
#75. Safety Key
1.
Attach the Support tube (15) between
the upright tubes (4 & 5) with four
Button Head Socket Bolts (151). Tighten bolts firmly.
2.
Place the Beverage Holder (150) on top of the Support tube (15) as shown in
the illustration.
3.
Place the magnet of the safety key (75) in between the Start and Stop
buttons
(if it isn't already attached). The treadmill
will not function
without
this in place.
4.
Check to make sure all bolts and screws are completely
tightened.
/
#120. 5x 16mm
Tapping Screws(6 pcs)
1.
Finish tightening
the button
head bolts (from Step 2 above) that secure the
console masts to the frame.
2.
Attach the Console mast covers (161 & 162) to the Frame Base (2) with six
Tapping Screws (1:20). Tighten screws using the Combination
M5 Allen
Wrench & Phillips Head Screw Driver (131).
11
FSO / F85 TREADMILL
Advertisement
