Advertisement
#130. 5/16"x 1/2"Button
Head Socket Bolts (8 pcs)
1.
Attach the Upright Tubes (4 & 5) onto the Frame Base (2) with eight Button
Head Socket Bolts (130) by using the Combination
M5 Allen Wrench &
Phillips Head Screw Driver (131). Do not tighten
the bolts completely
until Step 7 is finished,
37
To complete
this step, it is recommended
that you find something
to rest the
console on at the appropriate
height or have someone
hold the console while
you connect the cables
1.
Connect the Speed Adjustment
Switch Cable (54) to the Speed Cable, Upper
(37). Connect the Incline Adjustment
Switch Cable (55) to the Incline Cable,
Upper (38). Connect the Computer
Cable, Middle (50) and Computer
Cable,
Upper (48). Tuck the excess cable into the hand rail tubing to prevent it from
getting
pinched.
Before
attaching
the hardware
to Step 5, make sure the cables
you just
connected
don't
get pinched
in between
the steel tubing.
If they do, this may cause issues that
prevent
the treadmill
from
operating
properly.
9
FSO / F85 TREADMILL
Advertisement
