Hand Held Products 9500 Supported Equipment Manual page 48

Terminal Setup
Select
RF Monitor
RF Monitor is an "Over The Air" diagnostic tool. It is used to collect diagnostic trace
information from RF terminals running PowerNet Twin Client software.
It runs on a Windows PC and will send a command to the RF terminal to start tracing.
The terminal, when it receives this command, will start sending the trace information
over the RF link to t
P C that can be
C lick on
Choosing
Terminal IP address and Terminal IP Port, and click on
2-38
from the
Tools
he PC that issued the command. This will be written to a file on this
sen t to us for analysis.
to Select Terminal or to Exit.
File
allows you to view a log of the terminal's activity. Enter the
Select Terminal
m enu.
OK
Supported Equipment Manual
.
•
January, 2006