Hand Held Products 9500 Supported Equipment Manual page 30

Terminal Setup
Use the
the highlighted option. Each m
Edit Mobile Unit IP
The IP list c
Enter the appropriate address and select
IP 206.232.71.38
SN 255.255.255.0
RT 206.232.71.1
<F3> Save <F7> Quit
Edit Server/Host IPs
If the host IP address(es) were not pre-configured as described in
section of Configuring the M
terminal menus, select this option and enter up to four Host IP addresses as required.
Host 0
IP 206.183.67.155
Port 23__
<F3> Save <F7> Quit
Press <
F3
Edit Radio Option
This function acts as a password to join the radio network. Terminals associating with an
Access Point must supply a matching value, determined by their configurations, or their
association requests will be ignored.
ID tsunami____________
<F3> Save
Edit License Key
The client software can be authorized automatically, as described in the next section,
Authorizing PowerNet. This menu option permits authorization of each terminal
manually. Select this option to obtain the terminal's Identification Code, which is used to
obtain the Authorization code from the Connect web site, as described in the next section.
The 12-digit value displayed at the top of the terminal screen is the Identification Code
for the terminal.
2-20
and
Up-Arrow Down-Arrow
enu option is described below.
ontains the terminal IP address, the Subnet Mask and the Router IP address.
anager, or if you wish to change those settings using the
> to save the configurations.
<F7> Quit
keys to navigate the menu, and press
> to save and/or
<F3 <F7
Supported Equipment Manual
to select
Enter
> to Quit.
the Setting the Servers
•
January, 2006