Hand Held Products 9500 Supported Equipment Manual page 118

Error Message Resolution Guide
Message
REMOVE FROM CRADLE;
ACQUIRING CRA DLE BUS;
Printer Out\n Of Range;
Connection Refused\nBy Host;
Connection Timed Out;
Connection Failed\nHost Not
Respond ing;
Connection Fa iled\nHost Unreachable;
Mobile Unit Out\nOf Range,
Unable\nTo Transmit;
4-10
Reason
Remove Mobile Unit from the
cradle.
Attemptin g to access the cradle
through the serial port you have
configured.
Printer o ut of the coverage area.
You connected to the target host
but the host disconnected you.
You connected to the host but did
not logon in the appropriate time so
the host disconnected you.
Could not connect to the Host.
Could no t connect to the Host.
Mobile Unit out of the coverage
area.
Solution
Advisory message.
Advisory message.
Most likely a range, access point or
radio issue. Troubleshoot the
customer's environment.
Verify that the configuration file has
the correct Mobile Unit type and New
environment variable set. Fallback to
the Connect Default to verify the
connection.
Modify the Host parameters for login.
Most likely a range, access point,
radio, host or netwo rk issue.
Troubleshoot the customer's
environment.
Most likely a range, access point,
radio, host or network issue.
Troubleshoot the customer's
environment.
Most likely a range, access point,
radio, host or network issue.
Troubleshoot the cu stomer's
environment.
Supported Equipment Manual
Reference Tech Note
---
---
T1113, T1114, T1161,
T1171, T1187 and
T1194
---
---
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
•
January, 2006