Hand Held Products 9500 Supported Equipment Manual page 113

Message
Error receiving h ost\nlist from Server;
Unexpected Server\ndata received;
Error starting\nhost application;
Select Host or App;
Connecting...;
TCP Error\nReading IP
Address\nREBOOT MOBILE UNIT;
Printer start error;
Battery too low\nto print;
Paper Feed Error\nFix Then Hit Enter;
Printer Error\nPrint Ended;
•
Supported Equipment Manual
Reason
Bad Prot ocol detected.
Bad Protocol detected.
Connected to the server but cannot
connect to the distant end.
Need to choose your
Host/application destination.
Attempting to connect to the
Host/application.
Mobile Unit missing Network IP
information.
Could not initialize the printer.
Not enough power to print.
Paper in the pr inter is not ready.
Can not pr int.
January, 2006
Solution
Usually a result of ba d cabling, power
or faulty transceiver. Also, will receive
this if the Mobile Unit is in the wrong
mode for server ope ration.
Usually a result of bad cabling, power
or faulty transceiver. Also, will receive
this if the Mobile Un it is in the wrong
mode for server operation.
Configure the server handler to access
the host application.
User selection required.
Advisory message.
Configure the Mobile Unit with the
correct network IP information.
Cable or power issue with the printer.
Replace the battery with a fully
recharged battery.
Replace the paper or rethread the
paper in the printer.
Check cable, battery, communication
settings and paper in the printer.
Error Message Resolution Guide
Reference Tech Note
---
---
---
---
---
---
---
---
---
---
4-5