Hand Held Products 9500 Supported Equipment Manual page 38

Terminal Setup
Synchronizing Configuration Files
Click to put a check in the Synchronize Configuration Files box to enable automatic
synchr onization of configuration files on the terminal. When the t
its configuration files will be compared with the most recent on the PC. The terminal is
updated automatically if it does not have the latest revision.
Synchronizing Program Files
Click to put a check in the Synchronize Program Files box to enable automatic
synchronization of program files on the terminal. When the terminal is cold booted, its
program files will be compared with the most recent on the PC. The terminal is updated
automatically if it does not have the latest revision.
Automatic IP Address Assignment
New terminals will be assigned IP addresses automatically if the following
checked.
The 9500 terminal does not require this step to find the Airloader server.
Note:
Do not check this option if a DHCP server is configured to manage address
Note:
To set the addresses, click on the
Assignments dialog box, as shown in the following figure.
2-28
assignments.
button to access the Segment Address
Addresses
Supported Equipment Manual
erminal is cold booted,
box is
•
January, 2006