Related Manuals for Hand Held Products 7600BG-122-B4EE - Hand Held Products Dolphin 7600
Summary of Contents for Hand Held Products 7600BG-122-B4EE - Hand Held Products Dolphin 7600
- Page 1 User’s Guide ® ® ® with Microsoft Windows CE 5.0 Downloaded from www.Manualslib.com manuals search engine...
- Page 2 Disclaimer Hand Held Products, Inc. (“Hand Held Products”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult Hand Held Products to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of Hand Held Products.
-
Page 3: Table Of Contents
Table of Contents Chapter 1 - Agency Approvals Label Locations........................... 1-1 Regulatory and Safety Approvals for all Dolphin Terminals ............1-2 FCC Compliance..........................1-3 Chapter 2 - Getting Started Out of the Box............................. 2-1 Desktop ............................... 2-2 Command Bar ............................. 2-2 Icons in the Command Bar ...................... - Page 4 29-Key Numeric Keyboard .........................4-4 Navigation Keys..........................4-4 Hardware Application Buttons......................4-5 Toggling Between Alpha and Numeric Modes................4-6 29-Key Blue Key Combinations (Alpha Mode) ................4-7 29-Key Shift Functionality in Numeric Mode ................4-7 29-Key Red Key Combinations ....................4-8 38-Key Alpha Keyboard........................4-9 Toggling Between Alpha and Numeric Modes................4-9 38-Key Red Key Combinations ....................4-10 38-Key NUM Lock Mode ......................4-11 Chapter 5 - Using the Image Engine...
- Page 5 Mounting the Dolphin HomeBase .......................8-5 Bottom Panel Dimensions ........................8-6 Dolphin HomeBase Technical Specifications ..................8-7 Chapter 9 - Dolphin QuadCharger Overview .............................9-1 Front Panel ............................9-1 Back Panel ............................9-2 Supplying Power to the QuadCharger ....................9-2 Battery Charging..........................9-3 Recommendations for Storing Batteries....................9-3 Mounting the QuadCharger .........................9-4 Troubleshooting...........................9-5 Dolphin QuadCharger Technical Specifications .................9-6 Chapter 10 - Dolphin Mobile Mount...
- Page 6 Rev D Dolphin® 7600 User’s Guide 10/18/2007 Downloaded from www.Manualslib.com manuals search engine...
-
Page 7: Chapter 1 - Agency Approvals
Agency Approvals Label Locations Dolphin 7600 mobile computers meet or exceed the requirements of all applicable standards organizations for safe operation. However, as with any electrical equipment, the best way to ensure safe operation is to operate them according to the agency guidelines that follow. -
Page 8: Regulatory And Safety Approvals For All Dolphin Terminals
Regulatory and Safety Approvals for all Dolphin Terminals Parameter Specification U.S.A FCC Part 15, Class B Canada ICES-003 European Community EN 55022 (CISPR 22) Class B EN60950:2000 EN60825-1:1994 + A11 + A2 EN55024:1998 The CE Mark on the product indicates that the system has been tested to and conforms with the provisions noted within the 89/336/EEC Electromagnetic Compatibility Directive and the 73/23/EEC and 93/68/EEC Low Voltage Directive. -
Page 9: Fcc Compliance
FCC Compliance Dolphin Batch terminals comply with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Page 10: Canadian Compliance
RF, Regulatory, and Safety Agency Approvals—802.11b/g and/or Bluetooth Parameter Specification RF Approvals U.S.A FCC Part 15.247 Canada RSS 210 R&TTE Compliance Statement—802.11b/g and/or Bluetooth Dolphin RF terminals are in conformity with all essential requirements of the R&TTE Directive (1999/5/EC). This equipment has been assessed to the following standards as applicable: Parameter Specification... - Page 11 The crossed out wheeled bin symbol informs you that the product should not be disposed of along with municipal waste and invites you to use the appropriate separate take-back systems for product disposal. If you need more information on the collection, reuse, and recycling systems, please contact your local or regional waste administration.
- Page 12 1 - 6 Rev D Dolphin® 7600 User’s Guide 10/18/2007 Downloaded from www.Manualslib.com manuals search engine...
-
Page 13: Chapter 2 - Getting Started
Getting Started Out of the Box Verify that your carton contains the following items: • Dolphin 7600 mobile computer (the terminal) • Main battery pack (3.7v, Li-ion) • AC power supply • Localized plug adapters • User CD Note: Be sure to keep the original packaging in case you need to return the Dolphin terminal for service; see Product Service and Repair on page... -
Page 14: Desktop
Step 3. Boot the Terminal Windows CE The terminal begins booting as soon as power is applied and runs by itself. Do NOT press any keys or interrupt the boot process. When the boot process is complete, the Desktop (see page 2-2) appears and the terminal is ready for use. Windows Mobile The terminal begins booting as soon as power is applied and runs by itself. -
Page 15: Icons In The Command Bar
Icons in the Command Bar Command Bar (see page 2-2) contains a number of icons that indicate the status of various functions on the terminal. Status Icon Meaning Opens the Start menu. Icons Between the Arrows Because there may be more icons than the device can display, use the left and right arrows to scroll through the icons. Accesses the Bluetooth radio. - Page 16 Pop-Up Menus With pop-up menus, you can quickly choose an action for an item. 1. Tap and hold the stylus on the item name. The pop-up menu appears. 2. Lift the stylus, and tap the action you want to perform. The contents of pop-up menus change according to the program you’re in.
-
Page 17: Chapter 3 - Terminal Hardware Overview
Terminal Hardware Overview The Dolphin 7600 includes a number of standard terminal configurations as well as charging and communication peripherals and accessories to maximize the efficiency of your application setting. Standard Terminal Configurations There are two standard Dolphin 7600 configurations: Dolphin 7600 WPAN Dolphin 7600 WPAN/WLAN •... -
Page 18: Front Panel Features
Front Panel Features Decode LED Scan LED 1/4 VGA Touch Screen Display (screen protector installed at the factory) Microphone Hardware Application Buttons Keyboard (29-key numeric) Decode and Scan LEDs The Scan LED lights red when you press the Scan trigger in scanning applications. The Decode LED lights green when a scanned bar code is successfully decoded. -
Page 19: Display Backlight
Display Backlight The touch screen display has a backlight that is programmed to turn off after a specified period of time that the device is idle. To change the default timeout parameters, tap Start > Settings > Control Panel > Display > Backlight tab. To adjust the intensity of the backlight, tap Start >... -
Page 20: Using Screen Protectors
Using Screen Protectors Hand Held Products defines proper use of the terminal touch panel display as using a screen protector and proper stylus. Screen protectors maintain the ongoing integrity (i.e., prevent scratching) of the touch panel, which is why their use is recommended for applications that require a high to medium level of interface with the touch panel. - Page 21 3. Carefully apply the flat edge of your plastic card to the upper right corner of the touch panel. Catch the edge of the screen protector and pull it up and away from the touch panel. Credit Card Screen Protector Touch Panel 4.
- Page 22 Installing Your Screen Protector When installing a new screen protector, use a flat plastic card (such as a credit card) to apply the screen protector smoothly and remove any air bubbles. Note: If you have one, you can also use the small plastic squeegees designed for touch panels. 1.
- Page 23 4. Align the exposed edge of the screen protector along the left edge of the touch panel. Make sure that it lies flush with edges of the touch panel. Note: To reposition the screen protector, lift up gently and reapply. 5.
- Page 24 6. Pull smoothly and evenly from left to right until the screen protector is applied. Press gently but firmly. Credit Card Screen Releasing Paper Protector Touch Panel 7. Use the card as necessary to smooth out any air pockets or bumps after application. Press gently but firmly. 8.
- Page 25 11. Clean the surface of the screen protector with a clean, non-abrasive, lint-free cloth. 12. Press the Backlight key to wake the terminal again. 13. For maximum performance, recalibrate the screen. Tap Start > Control Panel > double-tap Stylus > Calibration tab. 14.
-
Page 26: Back Panel Features
Back Panel Features Image Engine Window Stylus Slot Accessory Attachment Speaker Finger Saddle Installed Battery I/O Connector Accessory Attachment This button can be used with various accessories; see Using the Accessory Attachment on page 3-15. Finger Saddle This is a slightly depressed and angled area of the back panel that is designed to cradle or “saddle” your pointer finger while holding the terminal. -
Page 27: Side Panel Features
Side Panel Features DC Power Headset Side IrDA Port Jack Jack Button Side Door Note: This graphic shows the left side of the Dolphin 7600 terminal. DC Power Jack The DC power jack receives external power from the Dolphin power cable that comes in the box with the terminal. When connected to the Dolphin Power Cable, the terminal is powered and the main battery pack is charging. -
Page 28: Top Panel Features
Top Panel Features Access Door Image Engine Window (with engine) *Pull the plastic tab to remove the plastic film cover over the image engine window before activating the image engine. Access Door For more memory, you can install optional memory cards by removing this door. For details, see Installing Memory Cards on page... - Page 29 4. When the access door is open, slide the SD card into the appropriate slot until it clicks into place. SD cards must be inserted with the label side facing forward (toward the touch screen). Note: To remove an installed SD card while the access door is open, tap on the edge lightly to unlock the card; the card will pop out just enough for you to grab its edge and pull it out.
-
Page 30: Bottom Panel Features
Bottom Panel Features I/O Connector Hand Strap Slot Hand Strap Slot There is an adjustable, elastic hand strap available for purchase with the Dolphin 7600 terminal. When installing the hand strap, you loop the elastic strip through this slot. For instructions, see Attaching the Hand Strap on page 3-15. -
Page 31: Using The Accessory Attachment
Using the Accessory Attachment The accessory attachment is a standard tab designed to fit universal accessories available for most cell phones. Attaching a Belt Clip The accessory attachment on the back panel fits universal swivel clips designed for belts or even pedestal mounts (not available from Hand Held Products). -
Page 32: Dolphin 7600 Peripherals
Dolphin 7600 Peripherals The following items are sold separately and enhance your Dolphin 7600 terminal’s capabilities. ™ Dolphin HomeBase The Dolphin HomeBase charging and communication cradle supports USB communication, enabling your terminal to interface with the majority of PC-based enterprise systems. When a terminal is seated in a powered HomeBase, its main battery pack charges in less than four hours. -
Page 33: Battery Power
Battery Power The Dolphin 7600 features intelligent battery technology with two types of battery power: • The main battery pack on the back panel (see Main Battery Pack on page 3-17) • The backup battery located inside the terminal (see Internal Backup Battery on page 3-19) -
Page 34: Checking Battery Power
Managing Main Battery Power Data and files saved on the Dolphin terminal may be stored in RAM memory; therefore, maintain a continuous power supply to the terminal to help prevent data loss. When you remove a battery pack, insert another charged battery pack in the Dolphin. If the main battery pack is low, insert the terminal into a charging peripheral to power the terminal and begin recharging the battery. -
Page 35: Internal Backup Battery
Internal Backup Battery Located inside the terminal, the backup battery is a 2.4V nickel metal hydride (NiMH) battery. The internal backup battery prevents the terminal from being reset when you remove the main battery pack. This battery retains RAM data and allows the real-time clock to remain operational for up to 30 minutes. If the terminal is left without the main battery pack for more than 30 minutes, the internal backup battery discharges and needs to be recharged to function according to specifications. -
Page 36: Resetting The Terminal
Resetting the Terminal There are two ways to reset the Dolphin terminal: a soft reset and a hard reset. Soft Reset (Warm Boot) A soft reset re-boots the device without losing RAM data. You would perform a soft reset 1) when the terminal fails to respond, 2) after installing software applications that require a reboot, or 3) after making changes to certain system settings. -
Page 37: Changing The Memory Allocation
Changing the Memory Allocation You can adjust file storage vs. program memory in System Properties. 1. Tap Start > Settings > Control Panel > Memory tab. 2. Move the slider to adjust the memory allocation and tap OK. The changes take effect immediately. Format IPSM “IPSM”... -
Page 38: Dolphin 7600 Terminal Technical Specifications
Dolphin 7600 Terminal Technical Specifications Operating System Microsoft Windows CE 5.0 Development SDK for C/C++, C# and Visual Basic developers for Windows CE 5.0 Environment (Requires Visual Studio 2005 Professional Editions or higher) Supported Software PowerNet™ Terminal Emulation (TNVT, 3270, 5250), Hand Held Products MSM (remote device management), and ITScriptNet Installed Applications Hand Held Products Power Tools and Demos and ITScriptNet Ready-To-Go applications... - Page 39 Dolphin 7600 Terminal Technical Specifications Construction High impact resistant PC/ABS housings Magnesium alloy internal chassis with component shock mounts Structural 4 ft. (1.2m) multiple drops to concrete, all axis, across operating temperature range Air: +/- 12k Vdc Direct: +/- 8k Vdc Environmental IP54 rating Dimensions...
- Page 40 3 - 24 Rev D Dolphin® 7600 User’s Guide 10/18/2007 Downloaded from www.Manualslib.com manuals search engine...
-
Page 41: Chapter 4 - Using The Keyboards
Using the Keyboards Overview There are two keyboard options: a 29-key keyboard and the 38-key keyboard. 29-Key Numeric Keyboard 38-Key Alpha Keyboard SCAN TA B PQRS WXYZ B K S P S T A R T The buttons are recessed under the overlay for maximum durability and the panel is backlit for maximum viewability in various lighting conditions. -
Page 42: Function Keys
Function Keys Function keys appear on both keyboards and perform specific functions. Name Function Backlight Toggles the keyboard backlight on and off. Backspace Backspace moves the cursor back one space. If you are typing text, a character is deleted each time you press the backspace key. Escape Cancels an action. -
Page 43: Alpha/Numeric Indicator
Alpha/Numeric Indicator The command bar on the screen features an icon that indicates the alpha/numeric status of the keyboard. This icon changes when the keyboard status changes. Icon Keyboard Status The keyboard is in lowercase alpha mode only for the next key pressed. The keyboard reverts to the mode it was in prior to the switch for the next key pressed. -
Page 44: Navigation Keys
29-Key Numeric Keyboard Hardware Application Buttons SCAN Scan Escape Navigation Keys Enter Shift TA B Alpha Indicators PQRS WXYZ Backspace Space B K S P S T A R T Backlight Modifier Keys Navigation Keys Located in the center of each keyboard for easy access with either hand, the navigation keys enable you to move the cursor through application screens. -
Page 45: Hardware Application Buttons
Hardware Application Buttons These four buttons are programmed to launch software applications from the Desktop. Hardware Application Buttons SCAN To customize these settings, tap Start > Settings > Control Panel > double-tap Buttons Buttons Column Matching Hardware Button P1—P4 Buttons P1—P4 marked on the overlay. Left Left side button;... -
Page 46: Toggling Between Alpha And Numeric Modes
Toggling Between Alpha and Numeric Modes The 29-key keyboard defaults to numeric mode, which means that the keyboard boots up to numeric mode after each hard reset. Numeric mode is when you type numbers with the number keys. Alpha mode is when you type letters or characters with the number keys. -
Page 47: 29-Key Blue Key Combinations (Alpha Mode)
29-Key Blue Key Combinations (Alpha Mode) Tap the Blue modifier key to switch to alpha mode for the next key pressed. Double-tap the Blue modifier key to switch to alpha mode permanently. Character Uppercase: Double-tap SFT @ ? ! : @ ? ! : pqrs PQRS... -
Page 48: 29-Key Red Key Combinations
29-Key Red Key Combinations Special Characters Key Combination Character Red + Left Arrow Red + Right Arrow Red + BKSP Red + SP Red + . Red + P1 Red + P2 Red + P3 Red + P4 Functions Key Combination Function Red + ESC (hold) Soft reset (warm boot) -
Page 49: 38-Key Alpha Keyboard
38-Key Alpha Keyboard Scan Navigation Keys Backspace Enter Escape Space (SP) Shift Backlight NUM Lock Key Modifier Keys Toggling Between Alpha and Numeric Modes The 38-key keyboard defaults to lowercase alpha mode, which means that the keyboard boots up to lowercase alpha mode after each hard reset. -
Page 50: 38-Key Red Key Combinations
38-Key Red Key Combinations Key Combination Function Red + Down Arrow Red + Up Arrow Red + Left Arrow Red + Right Arrow Red + Left Side Button Red + Right Side Button Red + ESC (hold) Soft reset (warm boot) Red + TAB (hold) Hard reset (cold boot) Red + A... -
Page 51: 38-Key Num Lock Mode
38-Key NUM Lock Mode • To switch to numeric mode for the next key pressed, tap the NUM key once. • To lock into numeric mode, double-tap the NUM key. • If locked in numeric mode, double-tap NUM key again to switch back to alpha mode. Numbers Character Special Characters... - Page 52 4 - 12 Rev D Dolphin® 7600 User’s Guide 10/18/2007 Downloaded from www.Manualslib.com manuals search engine...
-
Page 53: Chapter 5 - Using The Image Engine
Using the Image Engine Overview ™ The Dolphin 7600 terminal houses a compact image engine using Adaptus Imaging Technology that instantly reads all popular 1D and 2D bar codes and supports omni-directional aiming and decoding. The image engine can also capture digital images, such as signatures and pictures of damaged inventory. -
Page 54: Supported Bar Code Symbologies
Supported Bar Code Symbologies The Dolphin 7600 image engines support the following bar code symbologies: Symbology Type Symbology Name 1D Symbologies Codabar Interleaved 2 or 5 Code 3 of 9 Matrix 2 of 5 Code 11 Plessey Code 32 Pharmaceutical (PARAF) PosiCode Code 93 Straight 2 of 5 IATA... -
Page 55: Activating The Engine
Activating the Engine When a scanning application is open, press the Scan key to activate the image engine. You can also press one of the side buttons (see Side Button on page 3-11), which are programmed to activate the image engine in a scanning application by default. - Page 56 Sample Bar Codes You can use the following bar codes to verify decoding: Sample 128 Sample PDF417 Code 128 PDF417 Test Message Omni-Directional Scanning Positions The high-vis aiming pattern frames the bar code to provide you with the best scanning performance. Note: To achieve the best read, the aiming beam should be centered horizontally across the bar code.
-
Page 57: Capturing Images
Capturing Images The image-capture process is an intuitive, split-second operation for experienced users. By following basic guidelines, however, new users can easily develop their own technique and, with practice, quickly learn to adapt to different application environments. Image Preview When the imaging process is initiated, the touch screen displays a preview of the object. This is a live video image of what the imager is currently viewing and has a slightly degraded appearance compared to the captured image. - Page 58 5 - 6 Rev D Dolphin® 7600 User’s Guide 10/18/2007 Downloaded from www.Manualslib.com manuals search engine...
-
Page 59: Communication Options
Communication Options Dolphin terminals offer several communication options including Microsoft ActiveSync, infrared, and wireless radios. I/O Connector (Wired Communication) The mechanical connector on the bottom panel (see I/O Connector on page 3-14) connects the terminal to various Dolphin communication peripherals that connect to a host workstation via USB (1.1 or higher), thus enabling ActiveSync communication. -
Page 60: Connecting The Usb Cable
Connecting the USB Cable Connect the USB cable to the I/O connector to facilitate USB communication between the Dolphin device and host workstation. Connector Host Workstation Cable *Power Connector Port *This is a communication-only cable until you plug the power cable into the power port. Connecting the Power Cable The power port on the back end of the USB connector fits the power cable that comes with each Dolphin 7600 device. -
Page 61: Activesync Communication
ActiveSync Communication To synchronize, ActiveSync 4.1 or higher must be installed and configured for the appropriate communication type on the host workstation and the Dolphin terminal. Dolphin terminals ship with ActiveSync already installed. Therefore, if ActiveSync is already installed on the host workstation, you just need to connect the Dolphin terminal to the host workstation (via Dolphin peripheral) to initiate communication. -
Page 62: Communicating With The Dolphin Terminal
Setting Up the Dolphin Terminal The Dolphin terminal defaults to USB communication out of the box. To verify and/or change the default setting, tap Start > Settings > Control Panel > PC Connections.) Must be checked to connect with a workstation. Tap to change the connections settings. - Page 63 The Mobile Device folder opens in Windows Explorer. The Dolphin terminal is now treated as a mass storage device, and transferring files is as simple as dragging and dropping or copying and pasting as you would for moving files between folders on your hard drive. Adding Programs via ActiveSync When selecting programs, verify that the program and version of the program are designed for the Windows CE 5.0 and the terminal’s processor.
-
Page 64: Wireless Radios
Wireless Radios There are two radio options: 802.11b/g and Bluetooth. 1. 802.11b/g: see WLAN (802.11b/g Radio) on page 6-6. 2. Bluetooth: see Bluetooth Manager on page 7-1. Connecting the Terminal to a Wireless Network You connect the terminal to a wireless network through the on-board radio (802.11b/g and/or Bluetooth). Each radio has its own configuration program and requires specific information about the wireless network to connect. -
Page 65: Adding Programs From The Internet
Adding Programs From the Internet When you have established a network connection (whether via modem or wireless radio), you can access the Internet and download additional software programs. When selecting programs, verify that the program and version of the program are designed for Windows CE 5.0 and the terminal’s processor. -
Page 66: Infrared Communication
Infrared Communication The BT Service tab beams files and data between the terminal and other devices equipped via the IrDA port. The maximum data transfer speed is 115 Kbps. IrDA Port Location IrDA Port Transferring Files and Information Note: We recommend disabling the Bluetooth radio before transferring data via infrared. If the Bluetooth radio remains enabled, the Beam File function will pick up MAC addresses as well as IrDA ports. - Page 67 6. Select a device in the list and tap Tap to Send. 7. As the file gets ready to send, the button at the bottom reads “Pending…” 8. While the file is transmitting, the button at the bottom reads “Sending…” and the command bar displays the percentage sent.
- Page 68 6 - 10 Rev D Dolphin® 7600 User’s Guide 10/18/2007 Downloaded from www.Manualslib.com manuals search engine...
-
Page 69: Chapter 7 - Bluetooth Manager
Bluetooth Manager Overview Each Dolphin 7600 contains a Bluetooth radio whose driver installs each time the device boots up. Enabling the Bluetooth Radio Single-tap the Bluetooth icon in the command bar Tap Start > Programs > Bluetooth Manager and tap the ON button to activate the Bluetooth radio. Use the left and right arrows in the upper right corner to scroll through the tab windows. -
Page 70: Setting Tab
Setting Tab Field Description Power This setting enables and disables the radio. BT Device ID Address The MAC address from the radio driver. Name The first time you open the Bluetooth manager, the default name of the Dolphin device appears. Rename Click this button to type in a unique name for the Dolphin terminal. -
Page 71: Serial Port Tab
Serial Port Tab On the Serial Port tab, you can register virtual COM server ports used by the Dolphin terminal to host its Bluetooth services. You can also register client ports used by the Dolphin terminal to access the Bluetooth services of other devices. Field Description Registered Bluetooth Serial Ports: This list contains the current COM ports in use. -
Page 72: Connecting To Bluetooth Printers
Connecting to Bluetooth Printers To connect to a Bluetooth printer, you need to register that printer as a new client port on the Serial Port tab. 1. In the Bluetooth Manager, tap the Serial Port tab and tap Register New Client Port. 2. - Page 73 5. Select Serial Printer and tap OK. 6. Select COM from the COM Prefix drop-down list. 7. Select the appropriate COM port number from the COM Index drop-down list. Dolphin® 7600 User’s Guide Rev D 7 - 5 10/18/2007 Downloaded from www.Manualslib.com manuals search engine...
- Page 74 8. Tap OK. When you have successfully connected, a Registered O.K. dialog box appears. 9. On the Serial Port tab, verify that the COM port is connected to the printer. (The MAC address of the printer will appear in the Server Addr column.) 7 - 6 Rev D Dolphin®...
-
Page 75: Connecting To Other Bluetooth Devices
Connecting to Other Bluetooth Devices 1. Power on the Bluetooth radio and tap the BT Service Tab. 2. Tap Scan Device Services, then Scan Device on the Scan Device window. The Bluetooth Manager scans for Bluetooth devices and services in range and displays them on the Scan Device Window. Note: To see a list of what the icons on this window mean, see Scan Device Window... - Page 76 7. On the Scan Device window, double-tap on the same service and select Active on the popup menu. The service must be active to use as a wireless connection. 8. The service will now appear with a checkmark to indicate that it’s an active connection Note: For more information about the popup menu, see Popup Menu on page...
-
Page 77: Popup Menu
Popup Menu Double-tap on a found device and a popup menu appears that enables you to connect to that device and use the service. Menu Item Description Trusted &/or Changes the found device to a trusted or untrusted device. Untrusted Untrusted devicesAppear with a icon. -
Page 78: Bluetooth Activesync
Bluetooth ActiveSync 1. On the BT Service tab, tap Scan Device Service and retrieve a device with ActiveSync services 2. You need to activate the service. Double-tap on the service and select Trusted, then Active on the popup menu. Note: You may need to authenticate the connection by entering a PIN. If not, tap No on the authentication popup window. For more details, see Connecting to Other Bluetooth Devices on page... -
Page 79: Chapter 8 - Dolphin Homebase
Dolphin HomeBase Overview As the hub of your Dolphin 7600 system, the Dolphin HomeBase charging and communication cradle supports full-speed USB 1.1 communication with a workstation. You can also purchase a serial RS-232 Dolphin HomeBase. Battery Charging The HomeBase completes a full charge of the main battery pack in less than four hours. In addition to charging, the HomeBase powers the intelligent battery charging system in the terminal that protects the battery from being damaged by overcharging. -
Page 80: Front Panel
Front Panel Terminal Well Dock LED Terminal Well Place the Dolphin terminal in this well to communicate with a host device, power the terminal, and charge its battery. Dock LED Turns solid green when the Dolphin terminal is properly seated in a powered HomeBase. When this light is on, the terminal is connected to the HomeBase. -
Page 81: Back Panel
Back Panel DC Power Jack Pivot Connector USB Port Pivot Connector This pivoting connector swivels 90 degrees. The default position is horizontal, with the connectors facing straight out the back panel. The pivot connector stops in both the horizontal and vertical positions, with the connectors facing out the bottom panel. -
Page 82: Charging The Main Battery
Charging the Main Battery The HomeBase powers the terminal and fully charges its main battery pack in less than four hours. As battery packs charge, the charging circuitry follows the two-step charging process (CC-CV) that is recommended for Li-Ion batteries. The process monitors changes in temperature, current, and voltage. -
Page 83: Mounting The Dolphin Homebase
Mounting the Dolphin HomeBase If you want to mount the HomeBase to a vertical surface, be sure to provide enough workspace with good lighting for the user to view and operate the Dolphin terminal while it is seated in the HomeBase. Back Panel Dimensions .15 in. -
Page 84: Bottom Panel Dimensions
Bottom Panel Dimensions .55 in. .67 in. (14.07 mm.) (16.97 mm.) 3.73 in. (94.88 mm.) Note: The pivot connector should be facing straight out the bottom panel (as shown) when mounting the HomeBase to a vertical surface. 8 - 6 Rev D Dolphin®... -
Page 85: Dolphin Homebase Technical Specifications
Dolphin HomeBase Technical Specifications Structural Dimensions 4 in. high X 4.4 in. wide X 3.7 in. deep (10.2 cm. X 11.2 cm. X 9.4 cm.) Weight 11.2 oz. (318g) Material Polycarbonate ABS blend Color Gray Mounting Two keyholes on the back panel for wall-mounting Capacity One Dolphin terminal Environmental... - Page 86 8 - 8 Rev D Dolphin® 7600 User’s Guide 10/18/2007 Downloaded from www.Manualslib.com manuals search engine...
-
Page 87: Chapter 9 - Dolphin Quadcharger
Dolphin QuadCharger Overview The Dolphin QuadCharger is a four-slot charging station that charges up to four Li-ion battery packs—both 2200mAh and 3240mAh—in four hours. For more details about charging, see Battery Charging on page 9-3. Use only the peripherals, power cables, and power adapters from Hand Held Products. Use of peripherals, cables, or power adapters not sold/manufactured by Hand Held Products will void the warranty and may damage the terminal. -
Page 88: Back Panel
Back Panel Power Supply Connector Power Switch Power Supply Connector Use this connector to attach the power supply to the QuadCharger. The universal power supply accepts input voltages between 90-265 volts. Power Switch Toggle the power switch to turn the QuadCharger on and off. Supplying Power to the QuadCharger Use the power adapter cable that comes with the Dolphin QuadCharger so that the input voltage is adjusted appropriately. -
Page 89: Battery Charging
Battery Charging Inserting and Removing Battery Packs To insert a battery pack, place the end of the battery without the locking tab into the bottom of the charging pocket and snap the battery into place with a hinging motion. To remove a battery pack, push the locking tab down and pull the battery away from the charging slot with a hinging motion. Charging Process The QuadCharger charges Dolphin 7600 Li-ion battery packs in four hours. -
Page 90: Mounting The Quadcharger
Mounting the QuadCharger The QuadCharger should be mounted on a dry, stable surface such as a desktop or workbench, or a flat, vertical surface such as a wall. Mounting Location When choosing a location for the QuadCharger: • Keep in mind that the mounting location must allow users easy access to power switch and power connector. •... -
Page 91: Troubleshooting
Troubleshooting If you encounter problems with the QuadCharger, refer to chart below for possible solutions. If problems persist, please contact Technical Assistance (see page 11-2). Problem Issue The Status LED does not come on when Check the power connections on the Dolphin QuadCharger; make sure I insert a battery pack into a slot. -
Page 92: Dolphin Quadcharger Technical Specifications
Dolphin QuadCharger Technical Specifications Structural Dimensions 11 in. long X 4.8 in. wide X 1.5 in. high (27.9 cm. X 12.2 cm. X 3.8 cm.) Weight 15.1 oz. (428g) Material Case: Polycarbonate ABS blend Color: Gray Mounting Use DIN rail slide to mount to a desktop or wall; see DIN Rail Dimensions on page 9-4. -
Page 93: Chapter 10 - Dolphin Mobile Mount
Dolphin Mobile Mount Overview The Dolphin Mobile Mount provides easy and secure access to the Dolphin terminal in mobile environments. Use only the peripherals, power cables, and power adapters from Hand Held Products. Use of peripherals, cables, or power adapters not sold/manufactured by Hand Held Products will void the warranty and may damage the terminal. Out of the Box The Dolphin Mobile Mount ships with •... - Page 94 2. The latch at the top should grip the back of the image engine window slot. Image Engine Latch Window 10 - 2 Rev D Dolphin® 7600 User’s Guide 10/18/2007 Downloaded from www.Manualslib.com manuals search engine...
-
Page 95: Mounting
Mounting The Dolphin Mobile Mount ships with a standard RAM mount (101B). You attach one ball joint that you attach to the back panel of the mount (with the fasteners provided). Dolphin® 7600 User’s Guide Rev D 10 - 3 10/18/2007 Downloaded from www.Manualslib.com... - Page 96 Then, you attach the rest of the RAM mount. Then, affix the RAM mount to a stable surface. 10 - 4 Rev D Dolphin® 7600 User’s Guide 10/18/2007 Downloaded from www.Manualslib.com manuals search engine...
-
Page 97: Product Service And Repair
Product Service and Repair Hand Held Products provides service for all its products through service centers throughout the world. To obtain warranty or non- warranty service, return the unit to Hand Held Products (postage paid) with a copy of the dated purchase record attached. Contact the appropriate location below to obtain a Return Material Authorization number (RMA #) before returning the product. -
Page 98: Technical Assistance
Technical Assistance If you need assistance installing or troubleshooting, please call your Distributor or the nearest Hand Held Products technical support office: North America/Canada Telephone: (800) 782-4263 Fax number: (315) 554-6705 E-mail: natechsupport@handheld.com Latin America Telephone: (803) 835-8000 Telephone: (800) 782-4263 E-mail: latechsupport@handheld.com Brazil... -
Page 99: Limited Warranty
Limited Warranty Hand Held Products, Inc. ("Hand Held Products") warrants its products to be free from defects in materials and workmanship and to conform to Hand Held Products’ published specifications applicable to the products purchased at the time of shipment. This warranty does not cover any Hand Held Products product which is (i) improperly installed or used;... - Page 100 11 - 4 Rev D Dolphin® 7600 User’s Guide 10/18/2007 Downloaded from www.Manualslib.com manuals search engine...
- Page 101 Downloaded from www.Manualslib.com manuals search engine...
- Page 102 Hand Held Products, Inc. 700 Visions Drive P.O. Box 208 Skaneateles Falls, NY 13153-0208 ™ 76-CE-UG Rev D 10/18/2007 Downloaded from www.Manualslib.com manuals search engine...
Need help?
Do you have a question about the 7600BG-122-B4EE - Hand Held Products Dolphin 7600 and is the answer not in the manual?
Questions and answers