Hand Held Products 9500 Supported Equipment Manual page 17

The option of
Run application at startup
option
Use GUI menus and screens
"Windows-like".
The
Code page
terminal. The default is zero, which means th the terminal will use the standard Unicode
code page. This option is necessary to turn on character sets for foreign languages. Fo
more information on code pages, see the document entitled "Code Pages" at
http://www.connectrf.com/faq.htm.
Enable aggressive linear decoding
optimizing how the imager reads barcodes. Check the box in front of the linear decoding
option to enable it and use the search range scroll box to make a selection from 1 to 6.
Enabling centering beam during imaging
red "line" appears in the middle of the scanning area to help in positioning the barcode.
Check the box in front of this option to enable it.
The
Timeout for laser aiming beam
laser scanners, not imagers. When the user first pulls the trigger, the scanner emits a
bright dot, which is used to aim the scanner at a barcode that is far away. This timeout is
how long the dot stays on before the scanning beam appears. Enter in the box the number
of seconds after which the laser aiming beam will time out.
Click on
Supported Equipment Manual
Run Airloader on terminal
and
setting determines the Windows font code page that will be used on the
after entering information.
OK
•
January, 2006
can be selected. The Windows CE options of
can be selected. Also, there is a CE
Hide task bar
that makes the terminal program act more
at
and
Linear search range
means that when the imager is on, a darker
option applies only to terminals with long-range
Terminal Setup
r
have to do with
2-7