Sending Configuration Files To The 7400/9500 Terminal - Hand Held Products 9500 Supported Equipment Manual

Supported equipment manual
Hide thumbs Also See for 9500:
Table of Contents

Advertisement

Sending Configuration Files to the 7400/9500 Terminal

1.
Cold boot the te
2.
Click
3.
Go to
4.
Double-click o
5. Select the
6. C
hoose a baud rate of
baud rate of
7. Click on
8. Close the screen.
9.
Go into
10. If the terminal is in the cradle, make sure the baud rate is 57600, and
choose a baud rate of 115200 if you are using a cable with the terminal.
11. Click on
Supported Equipment Manual
rminal.
.
Enter
,
, and
Start
Settings
Control Panel
n the
Communications
tab.
PC Connection
Infrared 57600
when using the terminal with the cable.
Direct 115200
.
OK
(an Hand Held Products utility) on the PC.
Tweak Activesync
then click on
Close Activesync,
January, 2006
on the terminal
.
icon.
whe
n using the terminal in the cradle or a
Open Activesync.
Terminal Setup
2-45

Advertisement

Table of Contents
loading

This manual is also suitable for:

7400

Table of Contents