G Wireless - SATO /s8408 Operator's Manual

802.11G WIRELESS

The wireless print server provides easy printer interface with 802.11g Wi-Fi compliant networks free of wired
connections. Each printer is shipped with an integrated driver and interface installed. The driver must be loaded
onto the host computer and configured to run one of the supported protocols.
SPECIFICATIONS
Variable Data Rates
Frequency Band
Wired Equivalent Privacy
Sensitivity
Range
Protocols
Protocol
IP Address
Subnet Mask
Gateway Address
Communication Mode
SSID
Channels
DIP SWITCH SETTINGS
The DIP switches serve to initialize the configuration saved on the Wireless-LAN board, print the configuration, and make a
self-diagnosis. To communicate with the host, set the communication mode by through switches 5 and 6, then set the
remaining switches to the OFF position.
Print of configuration and self-diagnosis are operable only on the screen after turning on the printer. Ensure all switches are
in the OFF position when operating the printer.
SWITCH SETTING
OFF
1
OFF
2
ON
OFF
3
ON
OFF
4
ON
NOTE: The communication mode may be set within the printer's Interface Mode. Go to [Communication] of the Interface
Mode to enable setup by either the DIP switches or through the Interface Mode.
WIRELESS LAN SIGNAL STRENGTH
Network Port
S8400 Series Operator Manual
Unit 3: Installation
128 bit, 64 bit (compatible with 40bit), none (WPA)
(typ, AAWGN, 8E-2 PER): -91dBm at 1Mbps, -88dBm at 2 Mdps, -87dBm at 5.5Mbps, -
100m indoors, 300m outdoors (environmentally dependent)
TCP/IP, IPX/SPX, Direct Mode IPX/IP, DLC/LLC, NetBEUI, NetBIOS/IP
802.11 Ad hoc, Ad hoc, Infrastructure
Optional alphanumeric character string (up to 32 characters)
Initialization/Reset to factory default upon power up.
Configuration report upon power up - prints diagnostic report upon powering up.
Off
Link LED Blinking
On
3-15
54, 11, 5.5, 2 and 1 Mbps
2.4 GHz ISM Band
84dBm at 11Mbps.
Status3 return
Status4 (cyclic response mode)
Status4 (ENQ response mode)
Status4 return
Status5 return
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
01 to 14
Normal operating setting.
Normal operating setting.
Normal operating setting.
Wireless Mode setting.
0 to 50% (weak)
50 to 75% (medium)
75 to 100% (strong)
PN: 9001160 (C)