SATO /s8408 Operator's Manual page 85

MENU
SET PASSWORD
ON OFF
PASSWORD NO.
XXXX
COMPATIBLE MODE
ON OFF
MEDIA LENGTH
XXXX MM
PROGRAM COPY
YES NO
PROGRAM COPY
CF CARD -> ROM
ROM -> CF CARD
CF CARD -> ROM
COPY START
YES NO
ROM -> CF CARD
COPY START
YES NO
SAVE PRINT LOG
ENABLE DISABLE
RIBBON TENSION
ADJUSTMENT
XX
THROUGHPUT
FAST NORMAL
S8400 Series Operator Manual
Unit 4: Printer Configuration
SERVICE MODE (TABLE 4-9)
Permits the determination of whether a password will be required to access and change principle
configuration features.
Permits the assignment of a password. Use the vertical arrow keys of the operator panel to scroll
digit options and the horizontal arrow keys to move from one digit location to another. Press the
Enter key to record the four-digit password chosen.
Determines whether or not the printer will be compatible with a previous printer model. When the
Compatibility Mode is ON, the functions and settings that are unique to the printer will be disabled
or modified to match the characteristics of older printer models of the same family. This allows
legacy or custom-programmed labeling software to run on this printer without requiring
modification.
Allows the maximum length of the label used to be defined. The default value varies depending
on head density: 8dot/mm = 0 to 2500mm, 12dot/mm = 0 to 1500mm, 24dot/mm = 0 to 400mm.
This screen will not appear if the Compatibility Mode has been turned ON.
Allows the determination of copying firmware data to and from the ROM and optional CF Card.
The default setting is NO, meaning that copying is not desired.
Appears if the YES option was chosen on the preceding screen and allows the direction of
information flow to determined.
This screen confirms the selection from the preceding screen and allows the option of initiating
the copy or to abort.
This screen confirms the selection from the preceding screen and allows the option of initiating
the copy or to abort.
Permits determination of whether a record of print activity will be maintained on the CF Card.
Sets ribbon tension. Higher value equals lower tension.
This screen allows the user to change the printer's delay timing to improve throughput. Selecting
FAST will decrease printer's delay timing and improve label throughput.
DESCRIPTION
4-39 PN: 9001160 (C)