SATO /s8408 Operator's Manual page 86

MENU
SAVE USER DEF.
YES NO
CLEAR PRINT LOG
YES NO
OUTPUT PRINT LOG
FROM SUBPORT
ENABLE DISABLE
COPYING
PROGRAM COPY
COMPLETE
PRESS ENTER
KEY
TRACE MODE
ON OFF
SELECT LANGUAGE
ENGLISH
FRENCH
GERMAN
SPANISH
ITALIAN
PORTUGESE
MENU
MAINTENANCE MODE
SERVICE MODE
FACTORY MODE
COUNTER CLEAR
NONE
ALL
HEAD
CUT
DISPENSE
S8400 Series Operator Manual
Unit 4: Printer Configuration
SERVICE MODE (TABLE 4-9)
When "YES" is selected, all printer menu settings will be saved in a file that can later be recalled
via the Default Setting Mode.
Allows the record of print activity to be cleared if a log has been maintained.
Allows the print log to be output to the printer's sub-port (port not used for print data) in real time.
The default is DISABLE.
Screen confirms that copying is in process and displays its progress status. A tinted field will
move laterally from the left toward the right as copying progresses. When the tinted bar reaches
100 on the scale, copying is complete.
This screen confirms the completion of the copy process and prompts for action to exit the
program.
If Trace Mode is enabled, three different icons will appear on the LCD to trace the processing of a
label. The first identifies data reception, the second displays after receiving <ESC>A (1BH), and
the third displays following a print operation.
Allows the language of the menu screens to be selected.
FACTORY MODE (TABLE 4-10)
Is the first menu screen of the Maintenance Mode that includes the Service Mode and Factory
Mode. Provides a prompt on the action required to proceed to the Factory Mode.
Counter Clear permits the operator to select individual counters to be reset to zero or by selecting
ALL, to entirely clear all of the printer's internal counters or EEPROM data.
DESCRIPTION
DESCRIPTION
4-40 PN: 9001160 (C)