Installing The Optional Cinewide Lens Mount; Installing The Autoscope Lens Motor (Vx-11D/Cinewide With Autoscope); Vx-11D/Cinewide With Autoscope Motor Assembly - Exploded View - Runco VideoXtreme VX-11d Installation & Operation Manual

Installation
3.4
Installing the Optional
CineWide Lens Mount
Installing the AutoScope
Lens Motor
(VX-11d/CineWide with
AutoScope)
If you are installing a standard VX-11d (without an anamorphic lens), skip this step and
proceed with Mounting the VX-11d (page 28).
If you are installing a VX-11d/CineWide, proceed with Installing the Fixed CineWide
Base Plate (VX-11d/CineWide) (page 27).
If you are installing a VX-11d/CineWide with AutoScope, proceed as follows to install the
AutoScope lens motor.
1. Do not install the CineWide lens yet, only the fixed CineWide
Note
2. Some components shipped with your projector may differ slightly
Figure 3-6 shows the VX-11d/CineWide with AutoScope motor assembly.
Screw, Phillips Pan-Head,
10-32 x 3/8" (12x)
AutoScope
1
Lens Motor
Figure 3-6. VX-11d/CineWide with AutoScope Motor Assembly – Exploded View
base plate or AutoScope lens motor. You will install the
CineWide lens after you install the projector and adjust the
primary lens.
from what is shown in these instructions.
2
24
CineWide with AutoScope
3
Ceiling Mount Adapter/
Projector Stand, Right
4 CineWide with
AutoScope Ceiling
Mount Adapter/
Projector Stand, Left
Runco VX-11d Installation/Operation Manual