Installing The Photoconductor And Toner Cassette - Ricoh Mv106 Operator's Manual

INSTALLATION

Installing the Photoconductor and Toner Cassette

First of all, remove all the pieces of tape attached with the machine.
Before using the machine, install the photoconductor and toner cassette as
follows:
Squeeze in the release button on
the left of the machine and open
the cover fully back.
Put in the photoconductor as
shown. The left and right ends
are marked "L" and "R" respec-
tively.
Shake the toner cassette from
side to side before installing it.
Put in the toner cassette. Make
sure it sinks right down.
The right end is marked "2".
Close the cover firmly.
78
Installing the Photoconductor and Toner Cassette