Table of Contents
Advertisement
OTHER FEATURES
Tonal Signals
On this model the
organizations offer you a special service by telephone, which you can access
by transmitting Touch tone or DTMF tones. If your phone service provides only
pulse dialing, or if you are calling over a digital network, the ability to generate
Tonal Signals will allow you to access these services. First, dial the other party
When you are through to the other end, press the Tone key and enter the code
number that is needed to access the required feature at the other terminal. You
do not need to press the Tone key if your machine is set up for dialing in Tone
Dial (DTMF) mode.
Using the Tone Key
Make sure that the machine is in standby mode, and that there is no
document in the feeder.
Pick up the telephone handset, or press the On Hook Dial key.
Dial the remote facility. Do not press the Start key.
After your line is connected to the remote facility, do the following:
If your telephone line type is DTMF (Tone Dial): Go to step 5.
If your telephone line type is Pulse Dial: Press the
appears in the display.
Input the digits that you need to use the remote facility. After you have
finished your business with the remote facility, hang up.
Note: Do not press the Start key.
46
L
key on the ten keypad is used as the Tone key. Some
Tonal Signals
L
on the ten keypad. A dot
Advertisement
Table of Contents
