Adjusting The Volume Of Various Features - Ricoh Mv106 Operator's Manual

Adjusting the Volume of Various Features

Adjusting the Volume of Various Features
(Function 92)
You can change the beeper (monitor) volume of the desired feature.
Press Function, 6, and enter the
access number 2222. Then press
9, 2.
Press Yes.
Adjust the transmission monitor
volume with
when you're done.
Adjust the reception monitor vol-
M
ume with &
when you're done.
Adjust the on hook monitor vol-
M
ume with &
when you're done.
Adjust the dial monitor volume
M N
with & and press Yes when
you're done.
Press Function to return to the ready state.
Beeps to signal transmissions.
Beeps to signal receptions.
Beeps to signal on hook dialing.
Beeps when a number is dialed.
M N
& and press Yes
N
and press Yes
N
and press Yes
TECHNICAL REFERENCE
NNN
NNN
NNN
NNN
N
M N
M N
M N
M N
69