Table of Contents
Advertisement
User Parameters (Function 63)
SW
Digits & Definition
08
2, 3:
(Can also use function 62)
10
7: Use dithering halftone (SPD) or
standard halftone (STD)?
12
2: Faxing & Report Toner Saving
Note:
If on, contrast will be set to "Normal" automatically, preserving image quality.
This is available when receiving fax messages and printing reports, but not
for copying.
Further, messages sent to you in halftone mode will automatically turn off
toner saving to insure a clear image.
To make sure that the fax quality is acceptable with toner saving on, print a
few reports.
(Note: If the sender is using a machine made by another manufacturer, toner
saving will stay on and this could lower image quality.)
3, 4: Fax reception
density
13
Access to the public telephone line
TECHNICAL REFERENCE
Settings
Bits
2 3 :
0 X: Off
1 0: Receive messages only from
senders whose RTI/CSIs are
programmed.
1 1: Receive messages only from
senders whose RTI/CSIs are
programmed.
STD: 0
SPD: 1
Off: 0 On: 1
Bit
Normal:
Darken:
Lighten:
Bit
Loop Start
Ground Start
(This feature is not available in
France.)
Flash Start
PSTN
3
4
0
0
0
1
1
0
0
1
1
0
0
1
1
1
0
0
67
Advertisement
Table of Contents
