Ricoh Mv106 Operator's Manual page 111

Option key
?
Hints
Problem? See page 54
To change the toner
cartridge, see page 49.
To add paper, see
page 48.
Use the Function,
M N
, and keys to
navigate through
functions and
options.
Functions:
Press the function key followed by one of the numbers below.
11 Picking a document stored elsewhere (page 30)
21 Erasing a message stored for transmission
(page 28)
22 Erasing instructions to pick up a document
(page 28)
31 Storing a number in one of the Quick Dial keys at
left (page 21)
32 Storing a number as a two-digit code (page 21)
33 Storing a group of numbers (page 23)
34 Setting the paper size (page 82)
41 Checking the last 35 communications (prints out
a report, page 34)
42 Printing a list of all messages and pick-up files
stored in the machine (page 35)
43 Printing a list of all the telephone numbers stored
in the fax machine (page 36)
51 Printing a message stored in the machine
(page 29)
Photocopy this cover and use as a quick reference.
Sending or picking up a fax
message later (page 16 )
Setting the number of pages
Printing an ID at the top of your
message
Follow the safety
instructions at the
beginning of this
manual.
Use the Yes & No
P L
keys ( & ) to
accept or reject
settings.
Faxing at a Glance
Fan your stack. (At most 30 one sided
pages)
Insert the document face up in the feeder.
Select Memory (LED on) or Immediate
Transmission (LED off) with the Memory
key.
Dial the number either from the keypad,
with a Quick Dial key (at the left), or with a
Speed Dial code.
If your telephone
line uses pulse
dialing, see page 46
for how to generate
tones.
61* Initial Settings:
Own telephone number
RTI (a name ID sent to other machines)
TTI (an ID printed on messages you send),
CSI (phone ID sent to other machines).
PSTN accessing code
(page 87)
62* Selecting the phone line , turning authorized
reception and the timer on or off, and turning
PC-FAX Reception mode on or off.
(page 90)
63* Printing and setting user parameters ( bit switch
settings for a variety of functions, page 64).
71* Night timer (page 43).
81* Setting the list of specified senders (for
authorized reception, page 37)
91* Adjusting the clock (page 91).
92* Adjust the volume (page 69).
93* Selecting a different language (page 70).
94* Counters (page 37).
*These functions require the access code on page 64.
Use Quick Dial
keys 01 to 08 to
enter letters and
Quick Dial key 10
to enter spaces and
symbols.