U" Group: User-Selectable Menu Functions - Hitachi SJ7002 Series Instruction Manual

3–74

"U" Group: User-selectable Menu Functions

"U" Group: User-selectable Menu Functions

The user-selectable menu functions allow you to configure (select) any twelve of the other
functions in the inverter and place them together in a convenient list. This feature provides
quick access for the most-used functions needed for your application. Each U Group function
can serve as a pointer to any of the other parameters. You do not have to use the Store key to
retain each association; just scroll to the desired standard parameter for each U Group function
and leave it. The setting can point to a monitor-only parameter (such as D001), or point to
editable parameters (such as A001). In the case of pointing to an editable functions, you use the
Up/Down keys to change the value and the Store key to accept the change into memory—the
same procedure as a normal parameter edit.
Func. Name/
Code Description
U001 User function 1
U002 User function 2
U003 User function 3
U004 User function 4
U005 User function 5
U006 User function 6
U007 User function 7
U008 User function 8
U009 User function 9
U010 User function 10
U011 User function 11
U012 User function 12
TIP: Function B037 selects which parameter groups are displayed. If you want to limit the
displayed parameters to only the U Group functions, set B037=02.
Range and Settings
"no" (disabled), or any of the
functions D001 to P049
Defaults
Run
Mode
FEF2 FUF2 FF2
Edit
FE2 FU2 F2
Lo Hi
(EU) (USA) (Jpn)
✘ ✔
no no no
✘ ✔
no no no
✘ ✔
no no no
✘ ✔
no no no
✘ ✔
no no no
✘ ✔
no no no
✘ ✔
no no no
✘ ✔
no no no
✘ ✔
no no no
✘ ✔
no no no
✘ ✔
no no no
✘ ✔
no no no