Hitachi SJ7002 Series Instruction Manual page 172

Sj7002 series
Hide thumbs Also See for SJ7002 Series:
Table of Contents

Advertisement

4–10
Connecting to PLCs and Other Devices
Be sure to keep the control logic wiring separated from the power terminal wiring. In the case
of model –3150Hxx, the drawing below shows how route control circuit wiring.
1. Separate the control circuit wiring into two bundles to make use of available space.
2. Route the wiring from the control terminal block to the wiring plate. Continue routing past
the PCB attachment plate to the wiring exit area.
3. Secure the control wiring to the PCB attachment plate with cable ties.
Wiring plate
Control circuit wiring
PCB attachment plate

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents