Assembly - Grizzly G1071 Owner's Manual

Assembly

To assemble your new machine:
1.
With the assistance of a helper, carefully lift
the table/trunnion assembly onto the top of
the sander base.
2.
align the mounting holes in the trunnions with
the mounting holes in the sander base.
3.
using the (4) ⁄ "-16 x 1
3
8
⁄ " lock washers, secure the table/trunnion
3
8
assembly to the sander base as shown in
figure 8.
trunnion
mounting
hardware (1 of 4)
figure 8. Table mounting.
4. secure the dust chute to the trunnion assem-
bly with (2) ⁄ "-16 x 1
3
8
"-16 hex nuts (figure 9).
washers and ⁄
3
8
hex Bolts & nuts
figure 9. Dust chute.
-14-
⁄ " hex bolts and
1
4
lock
handle
(1 of 2)
sander Base
⁄ " hex bolts, ⁄ " lock
1 3
2 8
dust Chute
trunnion
assembly
5.
thread the table stop bolt and jam nut into
the sander base, as shown in figure 10.
table stop
Bolt
Jam nut
figure 10. Table stop bolt.
6. loosen the table lock handles located on
each side of the table trunnion assembly
(figure 8).
7.
using a machinist square, bring the table sur-
face square to the spindle surface as shown
in figure 11.
Note: It may be necessary to thread the table
stop bolt further into the base in order to
make the table square to the spindle.
spindle surface
table
figure 11. Checking table for square.
model g1071 (mfg. 1/02+)
sander Base
machinist's
square