Table of Contents
Advertisement
Site Considerations
Workbench Load
Refer to the Machine Data Sheet for the weight
and footprint specifications of your machine.
Some workbenches may require additional rein-
forcement to support the weight of the machine
and workpiece materials.
Placement Location
Consider anticipated workpiece sizes and addi-
tional space needed for auxiliary stands, work
tables, or other machinery when establishing a
location for this machine in the shop. Below is
the minimum amount of space needed for the
machine.
Electrical
=
Connection
15½"
Figure 6. Minimum working clearances.
Children and visitors may be
seriously injured if unsuper-
vised around this machine.
Lock entrances to the shop
or disable start switch or
power connection to prevent
unsupervised use.
Model T32459 (Mfd. Since 03/23)
The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to Needed for Setup and gather
all listed items. To ensure the assembly process
goes smoothly, first clean any parts that are cov-
ered or coated in heavy-duty rust preventative (if
applicable).
To assemble machine:
1.
Loosen (2) control box mount cap screws,
fully extend control box mount from machine
base, then tighten screws (see Figure 7).
Control Box
Mount
19"
Figure 7. Control box mount fully extended.
2.
Attach control box to mount with (4) M5-.8 x 8
cap screws (see Figure 8).
Figure 8. Control box attached to mount.
Assembly
x 2
Control Box
x 4
-13-
Advertisement
Table of Contents
