Event Messages; Fault Events - Qlogic Fibre Channel Switch Event Message Manual

3

Event Messages

This section lists event messages from the command line interface and Enterprise
Fabric Suite 2007 in message ID sequence by the following severity levels:

Fault Events

Alarm Events
Critical Events
Warning Events
Informative Events
You can look up a message by its message ID or by searching for the message
text. If the message you are looking for does not appear in this section, contact
your authorized maintenance provider.
Fault Events
The following fault messages apply only to SANbox 9000 series switches. Fault
events, like alarms, require administrator attention and may require assistance
from your authorized maintenance provider.
AC_FAULT
Meaning:
AUX_PORT_ERROR
Meaning:
FAN_FAULT_DETECTED
Meaning:
FAN_FLOW_MISMATCH
Meaning:
FAN0_MISSING
Meaning:
59060-06 A
AC power may be unplugged or switched off.
At least one internal FC link is not functional.
Fan blade reports an internal fault.
Incompatible air flow directions (FAN0, FAN1, PS0, PS1)
FAN0 is not installed.
3-1