Qlogic Fibre Channel Switch Event Message Manual page 63

A
(C) (8400.0029) (Switch) (User account_name attempted to log into switch with an incorrect
password)
Meaning:
(C) (8400.002A) (Switch) (User account_name attempted to log into switch with an incorrect
password)
Meaning:
(C) (8400.002E) (Switch) (number_of_zone_members zone members are being saved - this
may take several seconds)
Meaning:
(C) (8400.002F) (Switch) (Zoning database of over 3000 zone members may damage some
vendors' switches, if you have other vendor's switches in your fabric,
please refer to their switch manual/documentation to see what zone member
limits the switch supports)
Meaning:
(C) (8400.0030) (Switch) (Zoning edit session has been preempted by a zoning merge)
Meaning:
(C) (8400.003B) (Switch) (Creating the support file - this will take several seconds)
Meaning:
(C) (8400.003C) (Switch) (Network setup is changing - may lose connection - admin being
released automatically)
Meaning:
(C) (8400.0042) (Switch) (Warning - deleting the active zoneset may cause fabric isolation)
Meaning:
(C) (8400.0043) (Switch) (Warning - clearing the active zoneset may cause fabric isolation)
Meaning:
59060-06 A
Invalid user login attempt.
Invalid user login attempt.
It will take several seconds to save the large zoning database.
You have a large database on the switch consisting of over 3000
zone members. This could cause a problem in mixed fabrics
because not all vendors support a configuration this large.
A zoning edit session has been preempted by a zone merge. The
zoning edit session has been canceled.
The switch is creating a support file. This takes a few seconds to
complete.
Changes made to the network configuration may interrupt your
connection to the switch.
Deleting the active zone set from the zoning database could isolate
all switches in the fabric.
Clearing all zoning definitions from the active zone set could isolate
all switches in the fabric.
3 – Event Messages
Critical Events
3-51