Qlogic Fibre Channel Switch Event Message Manual page 81

A
(I) (8400.0026) (Switch) (A zoning configuration edit session has been canceled)
Meaning:
(I) (8400.002B) (Switch) (User login account_name is being closed - In-Band connections
have been disabled)
Meaning:
(I) (8400.002C) (Switch) (User login session session_ID user account_name has timed out)
Meaning:
(I) (8400.0036) (Switch) (Hotreset not permitted at this time, try again later)
Meaning:
(I) (8400.0037) (Switch) (VIEnable automatically set to False since MFSEnable has been set
to True)
Meaning:
(I) (8400.0038) (Switch) (LCFEnable automatically set to False since MFSEnable has been
set to True)
Meaning:
(I) (8400.0039) (Switch) (MFSEnable automatically set to False since VIEnable has been set
to True)
Meaning:
(I) (8400.003A) (Switch) (MFSEnable automatically set to False since LCFEnable has been
set to True)
Meaning:
(I) (8400.003E) (Switch) (Readjusting TempMonitoringWarning from value C to value C)
Meaning:
59060-06 A
The zoning configuration edit session has been canceled as a
result of the Zoning Cancel command.
The session has been closed as a result of a configuration change.
A user login session has ended because of inactivity.
Conditions exist that will not allow a hotreset. Try again later.
Setting the Set Config Port parameter MFSEnable to True
automatically sets the Set Config Port parameters VIEnable and
LCFEnable to False.
Setting the Set Config Port parameter MFSEnable to True
automatically sets the Set Config Port parameters VIEnable and
LCFEnable to False.
Setting the Set Config Port parameter VIEnable to True
automatically sets the Set Config Port parameter MFSEnable to
False.
Setting the Set Config Port parameter LCFEnable to True
automatically sets the Set Config Port parameter MFSEnable to
False.
The temperature threshold at which the switch issues a warning
alarm is being changed.
3 – Event Messages
Informative Events
3-69