Qlogic Fibre Channel Switch Event Message Manual page 44

3 – Event Messages
Alarm Events
(A1005.009D) (IPSec configuration error: Policy policy_name : reason)
Meaning:
Action:
(A1006.0004) (Zoning conflict, device_WWN is in an ACL hard zone, but device_WWN
share a soft zone)
Meaning:
Action:
(A1006.0005) (Zoning enforcement error in Nameserver)
Meaning:
Action:
(A1006.0006) (Zoning conflict, device_WWN and device_WWN do not share an ACL hard
zone, but device_WWN share a soft zone)
Meaning:
Action:
(A1007.0001) (Security: Unspecified zoning enforcement error)
Meaning:
Action:
(A1007.0002) (Security: Remote Switch with WorldWide Name (WWN) wwn configured for
chap, no chap configured for local switch. 2-way Authentication Failure)
Meaning:
Action:
3-32
An error occurred affecting the specified policy while saving the IP
Security configuration. The policy has not been applied to the
active database.
Redo modifications to the policy and save it.
The named zone members cannot communicate because they are
members of different ACL hard zones.
Place both zone members in the same ACL hard zone or exclude
both from ACL hard zones.
An error occurred while checking ACL zoning.
Contact your authorized maintenance provider.
The named zone members cannot communicate because they are
members of different ACL hard zones.
Place both zone members in the same ACL hard zone or exclude
both from ACL hard zones.
A device was not authorized or it failed security checks and will not
be allowed to join the fabric.
None
The device WWN is either not configured in the security database,
or it is not configured for Challenge Handshake Authentication
Protocol (CHAP).
Add the device WWN to the active security set if it missing, or
modify the group to allow for CHAP authentication with the other
devices.
S
59060-06 A