Qlogic Fibre Channel Switch Event Message Manual page 42

3 – Event Messages
Alarm Events
(A1005.0074) (Blade seating is questionable)
Meaning:
Action:
(A1005.0075) (Blade seating problem was resolved)
Meaning:
Action:
(A1005.0076) (Extraction latch is open)
Meaning:
Action:
(A1005.0077) (Extraction latch was closed)
Meaning:
Action:
(A1005.0078) (Extraction latch ignored until hotreset completes)
Meaning:
Action:
(A1005.0079) (Blade fault fault reported from primary CPU, resetting switch)
Meaning:
Action:
(A1005.007A) (Blade fault fault reported from primary CPU, powering off blades/ports)
Meaning:
Action:
(A1005.007C) (Secondary CPU's latch is closed so now able to become Fault Tolerant)
Meaning:
Action:
(A1005.007D) (Canceling callhome edit mode as a result of a CPU switchover)
Meaning:
Action:
3-30
A SANbox 9000 blade is improperly installed.
Examine the switch and reinstall blades as needed.
The SANbox 9000 blade seating problem as resolved.
None
A SANbox 9000 blade latch is open.
Examine the switch and close open latches.
The SANbox 9000 blade latch has been closed.
None
Extraction latch was opened while a switch hot reset was in
progress.
Return the extraction latch to the closed position. Wait until the hot
reset is complete, then remove the blade.
A blade fault has occurred on the SANbox 9000 primary CPU
blade and the switch is resetting.
Contact your authorized maintenance provider.
A blade fault has occurred on the SANbox 9000 primary CPU
blade. I/O blades are being powered down.
Contact your authorized maintenance provider.
The SANbox 9000 secondary CPU blade latch has been closed;
the switch is now fault tolerant.
None
A CPU blade switchover occurred while a CallHome Edit session
was open. The CallHome Edit session was canceled.
Reopen the CallHome Edit session.
S
59060-06 A