Qlogic Fibre Channel Switch Event Message Manual page 14

3 – Event Messages
Fault Events
FAN1_MISSING
Meaning:
FW_APP_FAIL
Meaning:
FW_APP_PEER_FAULT
Meaning:
FW_APP_SELF_FAULT
Meaning:
FW_APP_STARTUP_FAIL
Meaning:
FW_FILE_SYSTEM_REMADE
Meaning:
FW_FT_APP_REG_FAIL
Meaning:
FW_FT_APP_SYNC_FAIL
Meaning:
FW_FT_CPU_FAILOVER_FAILED
Meaning:
FW_FT_NO_ABDICATE_REPLY
Meaning:
FW_HEARTBEAT_LOST
Meaning:
FW_INIT_FAIL
Meaning:
FW_POST_FAIL
Meaning:
FW_UPDATE_FAIL
Meaning:
3-2
FAN1 is not installed.
Internal application failure.
Application declared an error communicating with other CPU.
Application declared an internal fault.
Application is unable to complete startup processing.
A Remake Filesystem command was performed in maintenance
mode.
Application is unable to register with Fault Tolerant (FT) manager.
Failure to synchronize data to the secondary CPU blade.
Unable to complete failover process.
Unable to failover due to lack of secondary CPU blade response.
Communication with the blade was lost.
Blade did not complete the initialization sequence.
Power-On Self Test failure.
Firmware update to the secondary CPU blade failed.
S
59060-06 A