Extreme Networks 700/1200 W Ac Power Supply - Extreme Networks BlackDiamond 8806 Hardware Installation Manual

Power Supplies for BlackDiamond 8800 Series Switches

Extreme Networks 700/1200 W AC Power Supply

Figure 33 shows the Extreme Networks 700/1200 W AC UL-listed accessory power supply unit
(Model number 60020/PS 2336). The power supply bay in a BlackDiamond 8800 series switch can
accommodate up to six hot-swappable Extreme Networks 700/1200 W AC power supplies.
Figure 33: Extreme Networks 700/1200 W AC Power Supply
The front panel on each 700/1200 W AC power supply provides a handle for insertion and removal of
the unit. Two cooling fans draw air in through the front vents on the power supply and exhaust the air
through the rear vents of the switch. Airflow through the power supply is independent from the airflow
through the rest of the switch.
The AC input connection is located on the switch directly below each installed power supply.
NOTE
In a BlackDiamond 8806 system, the Extreme Networks 700W/1200 W AC power supply can be used with
an Extreme Networks 600/900 W AC power supply in the same chassis.
Extreme Networks does not recommended using the 700/1200 W AC power supply with an Extreme Networks
1200W DC power supply in the same BlackDiamond 8800 series switch.
WARNING!
Field operators must not attempt to open the 700/1200 W AC power supply enclosure for any reason; the
power supply does not contain user-serviceable parts. In the event of failure, return the defective 700/1200 W AC
power supply to Extreme Networks for repair or replacement.
54
EX_015
BlackDiamond 8800 Series Switches Hardware Installation Guide