Chapter 10: Blackdiamond Psu Covers; Required Tools - Extreme Networks BlackDiamond 8806 Hardware Installation Manual

10
C H A P T E R
Covers are available to mask the front panels of the installed power supplies in the BlackDiamond 8800
series switches.
This chapter includes the following sections:
Required Tools on page 141
●
BlackDiamond 8806 PSU Cover on page 142
●
BlackDiamond 8810 PSU Cover on page 145
●

Required Tools

You need a #2 Phillips screwdriver to attach the power cord management bracket to the switch.
After the power cord management bracket is installed, you do not need any tools to attach the PSU
cover.
BlackDiamond 8800 Series Switches Hardware Installation Guide
BlackDiamond PSU Covers
141