8900-G96T-C - Extreme Networks BlackDiamond 8806 Hardware Installation Manual

8900-G96T-c

The 8900-G96T-c I/O module
Each connector provides six ports.
NOTE
The 8900-G96Tc module is not compatible with the 10G4X module. If an 8900-G96Tc module and a
10G4X module are installed in the same chassis, only one of these modules will function.
Figure 28: 8900-G96T-c I/O Module
96-port 10/100/1000BASE-T, MRJ21
1 7 13 19 25
2 8 14 20
3 9 15 21 27
4 10 16 22
5 11 17 23 29
6 12 18 24
1 2 3 4 5 6 7 8 9 10 11 12 13 14
49 50 51 52 53 54 55 56 57 58 59 60 61 62
o d u l e s t a t u s L E D s
In the default configuration of the 8900-G96T-c I/O module, all ports:
Are added to the default VLAN as untagged
●
Inherit the properties of the default VLAN (for example, protocol type and VLANid)
●
Operate in autonegotiation mode
●
A pushbutton switch at the right of the module front panel selects which of two port groups are
displayed by the port LEDs.
The 8900-G96T-c I/O module has the following LEDs:
Module status
●
Module diagnostics
●
Port status
●
For information about the LEDs and their activity on the 8900-G96T-c I/O module, see
LEDs" on page 50.
BlackDiamond 8800 Series Switches Hardware Installation Guide
(Figure 28) has 96 10/100/1000BASE-T ports using MRJ21 connectors.
1 0 / 1 0 0 / 1 0 0 0 B A S E - T
p o r t s
31 37 43 49 55 61
26 32 38 44 50 56
33 39 45 51 57 63
28 34 40 46 52 58
35 41 47 53 59 65
30 36 42 48 54 60
15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79
41532
67 73 79 85 91
62 68 74 80 86 92
69 75 81 87 93
64 70 76 82 88 94
71 77 83 89 95
66 72 78 84 90 96
1~48
32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96
P o r t g r o u p s e l e c t o r b u t t o n
Push
Button
49~96
B D _ 2 2 8
"I/O Module
47