Extreme Networks BlackDiamond 8806 Hardware Installation Manual page 93

Figure 57: Attaching the Support Bracket to the Rack
4 Lift the back of the empty chassis onto the support bracket.
5 Slowly guide the chassis into the rack until the mounting brackets are against the rack uprights.
6 Secure the chassis to the rack using eight rack mounting screws. (Screws are not provided.) Be sure
that the screws are tight. Refer to
NOTE
Figure 58 and Figure 59
mounting locations shown in the figure, but insert the screws through the designated slot locations of the mid-
mount brackets.
BlackDiamond 8800 Series Switches Hardware Installation Guide
Figure 58 and Figure 59
show a standard rack mount. For mid-mount installation, use the same
for the screw locations.
93