EUROCOM Notebook V12.1.00 User Manual page 125

5. Slide the hard disk assembly
computer.
6. Remove screws &
5
7. Reverse the process to install a new disk and do not forget to reinstall the
insulation plate.
8. Replace the component bay cover (see page
4
forward, and remove the assembly from the
4
and the primary HDD insulation plate
6
6 -
7
5
.
7
6).
Upgrading the Hard Disk Drive(s) 6 - 9
Upgrading The Computer

HDD Insulation Plates
Note that the HDD insu-
lation plates for the pri-
mary and secondary
hard disks, though simi-
lar in outward appear-
ance, are
6
interchangeable.
plates are
marked 1ST HDD & 2nd
HDD.
Make sure you use the
appropriate insulation
plate for the HDD as the
sizes are slightly differ-
ent
Figure 6 - 5
Primary Hard Disk
Insulation Plate
Removal
NOT
The
6
clearly