System Startup - EUROCOM Notebook V12.1.00 User Manual

System Startup

1. Remove all packing materials and place the computer on a stable surface.
2. Securely attach any peripherals you want to use with the notebook (e.g. keyboard and mouse) to their ports.
3. Attach the AC/DC adapter to the DC-In jack at the rear of the computer, then plug the AC power cord into an
outlet, and connect the AC power cord to the AC/DC adapter.
4. Use one hand to raise the lid/LCD to a comfortable viewing angle (do not exceed 135 degrees); use the other
hand (as illustrated in
the lid/LCD).
5. Press the power button on the top right of the computer for about 2 - 3 seconds to turn the computer "on" (note
that the power LED on the front of the computer will turn from orange to green when the computer powers
on).

Shutdown
Note that you should always
shut your computer down by
choosing the Shut Down
command from the bottom
right of the Start menu in
Windows. This will help pre-
vent hard disk or system
problems.
Figure 1 - 1 - Opening the Lid/LCD & Computer with AC/DC Adapter Plugged-In
Figure 1 - 1 below) to support the base of the computer (Note: Never lift the computer by
Quick Start Guide
System Startup 1 - 5
1