Using The Ribbon Tension Option; Using The Lcd Contrast Option - FARGO electronics DTC300 Service Manual

RESTRICTED USE ONLY

Using the Ribbon Tension Option

Step Procedure
1 Use the Ribbon Tension option to increase the amount of tension (drag) on the
Ribbon during printing.
Enter a negative value to decrease the amount of tension that is placed on the
Ribbon during printing
OR
Enter a positive value to increases the amount of tension that is placed on the
Ribbon during printing.

Using the LCD Contrast Option

Use this option to adjust the contrast of the LCD.
Step Procedure
1 Enter a positive value to increase the contrast of the LCD display on the front of
the Printer.
OR
Enter a negative value to decrease the contrast of the LCD display on the front
of the Printer.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3)
Fargo Electronics, Inc.
6-115